Via EPIA-NX15000G User Manual - Page 23
Case Connector, Power Switch PW_BN, Reset Switch RST_SW, Power LED PWR_LED, HDD LED HD_LED, Speaker
View all Via EPIA-NX15000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installation Case Connector: FPNL The FPNL pin header allows you to connect the power switch, reset switch, power LED, HDD LED and the case speaker. Pin Signal Pin Signal 1 1 +PWR_LED 2 +HD_LED 3 +PWR_LED 4 -HD_LED 5 -PWR_LED 6 PW_BN 7 SPEAK+ 8 GND 9 KEY 10 RST_SW 11 SPEAK- 12 GND Power Switch (PW_BN) Connect to a 2-pin power button switch. Pressing this button will turn the system power on or off. Reset Switch (RST_SW) The reset switch is used to reboot the system rather than turning the power ON/OFF. Avoid rebooting the system, if the HDD is still working. Connect the reset switch from the system case to this pin. Power LED (PWR_LED) The LED will light when the system is on. If the system is in S1 (POS - Power On Suspend) or S3 (STR - Suspend To RAM) state, the LED will blink. HDD LED (HD_LED) HDD LED shows the activity of a hard disk drive. Avoid turning the power off when the HDD LED still has a lit. Connect the HDD LED from the system case to this pin. Speaker (SPEAK) The speaker from the system case is connected to this pin. 11 Downloaded from www.Manualslib.com manuals search engine