Via EPIA-PX10000G User Manual - Page 53
USB 1.0 Controller, USB 2.0 Controller, USB Operation Mode
UPC - 825529001969
View all Via EPIA-PX10000G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
USB DEVICE SETTING BIOS Setup Phoenix - AwardBIOS CMOS Setup Utility USB Device Setting USB 1.0 Controller USB 2.0 Controller USB Operation Mode USB Keyboard Function USB Storage Function [Enabled] [Enabled] [High Speed] [Enabled] [Enabled] *** USB Mass Storage Device Boot Setting *** UFDDA USB Floppy UFDDB USB Floppy No Device [Auto mode] No Device [Auto mode] No Device [Auto mode] No Device [Auto mode] No Device [Auto mode] No Device [Auto mode] No Device [Auto mode] No Device [Auto mode] Item Help Menu Level [Enable] or [Disable] Universal Host Controller Interface for Universal Serial Bus : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults USB 1.0 Controller Enable or disable Universal Host Controller Interface for Universal Serial Bus. Settings: [Enabled, Disabled] USB 2.0 Controller Enable or disable Enhanced Host Controller Interface for Universal Serial Bus. Settings: [Enabled, Disabled] USB Operation Mode Auto decide USB device operation mode. Setting High Speed Full/Low Speed Description If USB device was high speed device, then it operated on high speed mode. If USB device was full/low speed device, then it operated on full/low speed mode. All of USB Device operated on full/low speed mode 41