ViewSonic G220F User Guide - Page 8
Using the Monitor - g220fb settings
UPC - 766907585612
View all ViewSonic G220F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Using the Monitor Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; example 85 Hz). After setting the timing mode, use the OnView® controls to adjust the screen image. For the best picture quality set your monitor timing mode to: VESA 1600 x 1200 @ 85 Hz. To set the Timing Mode: 1. Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the resolution. 2. Set the refresh rate: See your graphic card's user guide for instructions. Note: The refresh rate should already be set if you have done the CD installation (or refer to your graphics card documentation). OSD Lock Settings You have the option of using the On Screen Display (OSD) locking feature, OSD LOCK, to prevent unwanted changes to the current image settings. • OSD Lock: Press and hold the [1] and [▼] buttons on the face of the monitor for 10 seconds. The message "OSD LOCK" will then display briefly, indicating that the OSD image settings are now locked. • OSD Unlock: Press and hold the [1] and [▼] buttons again for 10 seconds. The message "OSD UNLOCK" will then display briefly, indicating that the OSD image settings are now unlocked. ViewSonic G220f/G220fB/G220fSB 5