ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto
ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keystone and Lens Shift Manual
 |
View all ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keystone and Lens Shift manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keystone and Lens Shift manual content summary:
- ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 1
important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 2
, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 3
ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 4
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 5
service needs. Please print this user guide and fill the information in the "For Your Records" section. For additional information, please see the "Customer Support" section in this guide. Product Name: Model Number: Document Number: Serial Number: Purchase Date: For Your Records LS900WU ViewSonic - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 6
Table of contents Important safety instructions 2 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 9 of the projector 64 Light Source Hours information........ 65 Troubleshooting 68 Specifications 69 Projector specifications 69 Dimensions 70 Ceiling mount - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 7
the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 8
the power supply's wall socket and call your local service center to have the projector serviced. 14. This product is capable of displaying inverted It should be used with a commercially available theft prevention cable. Safety instructions for ceiling mounting of the projector We want you to have a - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 9
scattered light can be hazardous to eyes and skin. There is a potential hazard of eye exposure to laser radiation if the included instructions are not followed. Caution - use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 10
Product labels Below drawing show the label's location. 1 12 Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 LASER RADIATION AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT Emitted wavelength : 450-460 nm Max - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 11
Location of laser aperture Below drawing is the laser aperture location. Be careful not to let the eye see the light directly. /DVHUDSHUWXUH Interlock switches This machine has 1 (Top cover) Interlock switches to protect the laser light Leakage. Will power-off the system individually when the top - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 12
or 80% when no input signal can be detected for a set period of time • Presentation timer for better control of time during presentations • Supports 3D display • Color Management allowing color adjustments to your liking • Less than 0.5W power consumption when power saving mode is turned on • Screen - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 13
Home Projector Quick Start Guide http://vsweb.us UG Link http://vsweb.us/ ViewSonic Corporation (US/Canada/Latin America) : www.viewsonic.com/support/product-registration : 14035 Pipeline Ave. Chino, CA 91710, USA : 909-468-1240 United States 1-800-688-6688 [email protected] Canada 1-866 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 14
Projector exterior view Front/upper side 12 3 4 5 6 7 8 9 Rear/lower side 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 23 Warning • THIS APPARATUS MUST BE EARTHED. 1. Front IR remote sensor 2. Projection lens 3. Focus ring 4. Zoom ring 5. LENS SHIFT UP/DOWN 6. LENS SHIFT RIGHT/ - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 15
makes 2. Focus ring adjustments. Adjusts the focus of the projected image. (Keystone key) 3. Zoom ring Adjusts the size of the projected image. Manually corrects distorted images resulting from an angled projection. 4. LENS SHIFT RIGHT/LEFT 10. (Menu down) Rotate to move lens right or left - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 16
the status of the light source. Toggles the projector between standby Lights up or flashes when the light source mode and Power ON. has developed a problem. 11 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 17
14 15 27 28 16 29 17 30 18 1. Power 7. / / / (Keystone keys) Toggles the projector between standby mode and Power ON. Manually corrects distorted images resulting from an angled projection. 2. HDMI 1 Left/ Right/ Up/ Down Selects HDMI 1 source for display. Selects the desired menu - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 18
between on and off. 17. Eco Mode/ID Set Selects a light source mode. 29. Network/9 Selects Network Display source for 18. Pattern/0 display. Displays embedded test pattern. 30. Color Mode 19. Power Off Selects an available picture setup mode. Turns the projector off. 13 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 19
Remote control code The projector can be assigned to 8 different remote control codes, 1 to 8. When several adjacent projectors are in operation at the same time, switching the remote control codes can prevent interference from other remote controls. Set the remote control code for the projector - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 20
• Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the batteries into a fire. There may be danger of an explosion. • If - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 21
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 22
Projection dimensions LS900WU (WUXGA) The "screen" mentioned below refers to the projection screen usually consisting of a screen surface and a support structure. • 16:10 image on a 16:10 screen (b) (a) (d) (c) (e) • 16:10 image on a 4:3 screen (b) (a) (d) (c) (f) (e): Screen (f): Center of lens - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 23
among these numbers due to optical component variations. It is recommended that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 24
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 25
the screen, you can connect the MONITOR OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below: 1. Connect the projector to a computer as described in "Connecting a computer" on page 20. 2. Take a suitable VGA cable (only one supplied) and - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 26
video natively, so if available on your devices, this should be your connection method of choice in preference to (composite) video. See "Connecting a Component Video source device" on page 22 for how to connect the projector to a component video device. Least video quality Composite Video is an - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 27
LAN port and RS-232C port are disabled when Network Settigs to the HDBaseT and RS232 settings to HDBaseT channel. Use LAN cables of up to 100m long. Exceeding this length, the image will be deteriorated, and can experience malfunction on LAN transmission. HDBaseT BEST PRACTICE: i. When In Doubt, Use - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 28
Connecting a composite Video source device Examine your Video source device to determine if it has a set of unused composite Video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. 1. Take a - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 29
Ring Tone" on page 43 for details. 4. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 5. Switch all of the connected equipment on. 6. The projector will start to search for input signals. The current input signal being scanned appears - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 30
Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. The OSD screenshots below are for reference only, and may differ from the actual design. Below is the overview of the OSD menu. Main menu icon Highlight Status Sub-menu - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 31
the message 'INPUT PASSWORD' follows. You can retry by entering another six-digit password, or if you did not record the password in this user manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 27 for details - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 32
for 8 times. The projector will display a coded number on the screen. 2. Write down the number and turn off your projector. 3. Seek help from the local service center to decode the number. You may be required to provide proof of purchase documentation to verify that you are an authorized user of the - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 33
the Quick Auto Search function in the SYSTEM menu is On if you want the projector to automatically search for the signals. You can also manually select the desired signal by pressing one of the source selection keys on the remote control, or cycle through the available input signals. 1. Press Source - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 34
Adjusting the projected image Adjusting the projection angle The projector is equipped with two adjuster foot. It changes the image height and vertical projection angle. Screw the adjuster foot to fine tune the angle until the image is positioned where you want it. If the projector is not placed on - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 35
Adjusting the horizontal image position With the lens horizontal image position can be adjusted to a maximum of 5% for 1080P and 5% for WUXGA of the image width. Note that the maximum horizontal image height adjustment can be limited by the vertical image position. For example it is not possible to - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 36
Adjusting projected image position using lens shift Vertical Horizontal Lens Shift Knob Lens Shift Knob The Lens Shift feature provides a lens shift function that can be used to adjust the position of the projected image either horizontally or vertically within the range detailed below. Shift - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 37
projected image becomes a trapezoid due to angled projection. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control 1. Press / / / to display the Keystone correction page. 2. Press to correct - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 38
Adjusting 4 corners Using the OSD menu Open the OSD menu and go to the DISPLAY > Corner Adj. menu. 1. It will show 4 corner adjustmant OSD on screen. 2. To select the corner you want to adjust than the selected area will show gray color 3. Two degree selection couble be adjust 4. To save the - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 39
Selecting the aspect ratio The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. With the advent of digital signal processing, digital display devices like this projector can - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 40
5. Native: The image is projected as its original resolution, and resized to fit within the display area. For input signals with lower resolutions, the projected image will display smaller than if 4:3 picture resized to full screen. You could adjust the zoom setting or move the projector away - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 41
Using Screen Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Screen Color feature can help correct the projected picture's colors to prevent possible color difference between the source and projected pictures. To use this - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 42
Adjusting Brilliantcolor Go to the IMAGE > ADVANCED > Brilliantcolor menu and press / . This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors in the projected picture. It enables a greater than 50% - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 43
color control adjustment to allow for more accurate color reproduction, should you require it. If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc., you can project any image from the disc on - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 44
Setting the presentation timer Presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the BASIC > Presentation Timer menu. 2. Press Enter to display the - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 45
Hiding the image In order to draw the audience's full attention to the presenter, you can press BLANK to hide the screen image. Press any key on the projector or remote control to restore the image. The word 'BLANK' appears at the lower right corner of the screen while the image is hidden. You can - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 46
via HDMI connection. That is, if a device that also supports CEC function is connected to the HDMI input of the projector, projects images in 3D format automatically. In other cases, you may need to manually select a 3D Sync format for the projector to project 3D images correctly. problem. 41 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 47
Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under POWER MANAGEMENT > Standby Settings, and the cable connections are correctly made. For - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 48
applied for trademark and logo registration in Japan, the United States of America, and other countries by JBMIA. Supported External Devices This projector is supported by the specified commands of the Crestron Electronics controller and related software (ex, RoomView®). http://www.crestron.com - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 49
can be connected to the LAN/RJ45 port and remote/control the projector, as well as the related control commands supporting for each external device, kindly please get contact with the Support-Service team directly. LAN_RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (Laptop - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 50
3. Right-click on Local Area Connection, and select Properties. 4. In the Properties window, select the Networking tab, and select Internet Protocol (TCP/IP). 5. Click Properties. 6. Click Use the following IP address and fill in the IP address and Subnet mask, then click OK. 45 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 51
7. Press the MENU button on the projector. 8. Select Advanced > Network Setting > Wired LAN. 9. After getting into Wired LAN, input the following: • DHCP: Off • IP Address: 10.10.10.10 • Subnet Mask: 255.255.255.0 • Gateway: 0.0.0.0 • DNS Server: 0.0.0.0 10. Press ENTER / . to confirm settings. Open - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 52
Category Crestron Control Projector Network Configuration User Password Admin Password Item IP Address IP ID Port Projector Name Location Assigned To DHCP (Enabled) IP Address Subnet Mask Default Gateway DNS Server Enabled New Password Confirm Enabled New Password Confirm more information, please - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 53
Preparing Email Alerts 1. Make sure that user can access the homepage of LAN RJ45 function by web browser (for ex-ample, Microsoft Internet Explorer v6.01/v8.0). 2. From the Homepage of LAN/RJ45, click Alert Settings. 3. By default, these input boxes in Alert Settings are blank. 48 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 54
). This is a required field. Select the alert conditions by checking the desired boxes. Fill in all fields as specified. User can click Send Test Mail to test what setting is correct. For successful sending an e-mail alert, you must select alert conditions and enter a correct e-mail address. 49 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 55
" communication by dedicated RS232 command control, there is alternative RS232 command control way, so called "RS232 by TELNET" for LAN/RJ45 interface. Quick Start-Guide for "RS232 by TELNET" 1. Check and get the IP-Address on OSD of the projector. 2. Make sure that laptop/PC can access the web - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 56
(ttt.xxx.yyy.zzz: IP-Address of the projector) If Telnet-Connection ready, and user can have RS232 command input, then Enter key pressed, the RS232 command will be workable. How to have TELNET enabled in Windows VISTA / 7 / 8 / 10 By default installation for Windows VISTA / 7 / 8 / 10, "TELNET" - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 57
OK button. Specsheet for "RS232 by TELNET" : 1. Telnet: TCP. 2. Telnet port: 4661. (for more detail, kindly please get contact with the service agent or team) 3. Telnet utility: Windows "TELNET.exe" (console mode). 4. Disconnection for RS232-by-Telnet control normally: Close Windows Telnet utility - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 58
Shutting down the projector 1. Press Power and a confirmation message is displayed prompting you. If you don't respond in a few seconds, the message will disappear. 2. Press Power a second time. 3. Once the cooling process finishes, a "Power Off Ring Tone" will be heard. Disconnect the power cord - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 59
Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. The menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 60
/No Blank Timer Disable/5 min/10 min/15 min/20 min/25 min/30 min Message On/Off Pattern On/Off Splash Screen Black/Blue/ViewSonic/Off 55 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 61
Main menu Sub-menu Options 5. ADVANCE D 3D Settings HDMI Settings Network Settings RS232 Settings Remote Sensor Light Source Settings Closed Caption Reset Settings 3D Sync 3D Sync Invert Save 3D Settings HDMI Format HDMI Range Wired LAN AMX Device Discovery Control 4 HDBaseT Baud Rate Channel - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 62
Main menu Sub-menu Options Language Multi-language OSD selection Projector Front Table/Rear Table/ Position Rear Ceiling/Front Ceiling Menu Display 5 sec/10 sec/15 sec/20 sec/ Menu Time 25 sec/30 sec Settings Menu Center/Top-Left/Top-Right/ Position Bottom-Left/Bottom-Right 6. - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 63
1. DISPLAY menu Description of each menu Function Screen Color Aspect Ratio Description See "Using Screen Color" on page 36 for details. This function is only available when a PC input signal is selected. See "Selecting the aspect ratio" on page 34 for details. Keystone See "Correcting keystone - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 64
2. IMAGE menu Function Color Mode Brightness Contrast Color Temp ADVANCED Reset Color Settings Description See "Selecting a picture mode" on page 35 for details. See "Adjusting Brightness" on page 36 for details. See "Adjusting Contrast" on page 36 for details. See "Selecting a Color Temperature" - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 65
details. Selecting On displays the current information on the screen when the projector is detecting or searching for a signal. The projector can display grid test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. Allows you to select - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 66
5. ADVANCED menu Function Description 3D Settings See "Using the 3D functions" on page 41 for details. HDMI Format Settings Network Settings See "Changing HDMI input settings" on page 28 for details. Wired LAN • DHCP: If the projector installation environment has the Dynamic Host Configuration - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 67
to the brightness of the projected picture. Light Source Power Only available when light source mode is under Custom. Reset Light Source Hours Service center shall reset light source hour after change light source parts. Closed Caption Light Source Hours Display light source usage hours. Caption - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 68
6. SYSTEM menu Function Language Projector Position Menu Settings Description Sets the language for the On-Screen Display (OSD) menus. See "Using the menus" on page 25 for details. See "Choosing a location" on page 16 for details. Menu Display Time Sets the length of time the OSD will remain - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 69
detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 70
Light Source Hours information Getting to know the light source hours When the projector is in operation, the duration (in hours) of light source usage is automatically calculated by the built-in timer. To obtain the light source hour information: 1. Open the OSD menu and go to the ADVANCED > Light - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 71
Setting Power Saving 5he projector lowers the power consumption if no input source is detected after 5 minutes to prevent unnecessary waste of light source life. You can further decide if you would like the projector to turn off automatically after a set period of time. 1. Open the OSD menu and go - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 72
Indicators Light Blue Red ON Flashing Flashing 7 blinks 8 blinks 9 blinks 9 blinks Off Off Off Off Off Off 1 blinks 2 blinks Off Off Off Off Off Off 4 blinks 6 blinks 6 blinks 6 blinks 6 blinks 6 blinks 6 blinks 6 blinks 6 blinks 1 blinks 2 blinks 3 blinks 4 blinks 5 blinks Off 1 blinks 2 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 73
Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on again during the - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 74
. • Not all models can be purchased in your region. General Product name Optical DLP Projector Resolution Display system Light source Electrical LS900WU: 1920 x 1200 WUXGA 1-CHIP DMD Laser Diode Power supply Power consumption Mechanical AC100-240V, 50-60 Hz (Automatic) 530 W; < 0.5 W (Standby - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 75
Environmental Requirements Operating temperature Operating relative humidity Operating altitude Storage temperature Storage humidity Storage altitude 5°C-40°C at sea level 10%-90% (without condensation) • 0-1499 m at 5°C-35°C • 1500-3000 m at 5°C-25°C (with High Altitude Mode on) -10°C to +60°C 10 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 76
Timing chart Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ UXGA WSXGA+ HD MAC 13" MAC 16" MAC 19" MAC 21" HDTV (1080p) Analog RGB Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x 768 4:3 1152 x 864 4:3 1280 x 768 15:9 1280 x 800 16:10 1360 x 768 16:9 1280 x - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 77
Signal VGA SVGA XGA WXGA Quad-VGA SXGA SXGA+ WXGA+ WSXGA+ HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) HDMI Resolution (dots) Aspect Ratio 640 x 480 4:3 800 x 600 4:3 1024 x 768 4:3 1280 x 768 15:9 1280 x 800 16:10 1360 x 768 16:9 1280 x 960 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 78
for Side-by-Side, Top-Bottom, and Frame Sequential formats. ** 120 Hz signals are supported for Frame Sequential format only. *** Video signal (SDTV 480i) is supported for Frame Sequential format only. HDMI 3D In Frame packing format Signal Resolution (dots) Aspect Ratio 1080p 1920 x 1080 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 79
Signal HDTV (1080p) HDTV (1080i) HDTV (720p) SDTV (480p) SDTV (576p) SDTV (480i) SDTV (576i) Component video Resolution (dots) Aspect Ratio 1920 x 1080 16:9 1920 x 1080 16:9 1280 x 720 16:9 720 x 480 4:3 / 16:9 720 x 576 4:3 / 16:9 720 x 480 4:3 / 16:9 720 x 576 4:3 / 16:9 Refresh - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 80
language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic Corporation makes no representations or warranties, either expressed or implied, with respect to the - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 81
Appendix IR control table Key (with Blue back light) Power On Power Off COMP HDMI HDMI2 HDMI3 HDBaseT Source Auto sync Up / V keystone + Blank Left / H keystone Enter Right / H keystone + Menu Down / V keystone Exit Information Aspect ratio Help PgUp / ID 1 Volume+ / ID 2 Zoom + / ID 3 PgDn / ID 4 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 82
RS232 command table Pin Description Pin Description 1 NC 2 RX 3 TX 4 NC 5 GND 6 NC 7 RTSZ 8 CTSZ 9 NC Baud Rate Data Length Parity Check Stop Bit Flow Control RS-232 protocol 115200 bps (default) 8 bit None 1 bit None When - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 83
Power Off Write Read High Altitude Mode Write Read Light Source Mode Write Read Message Write Read Action ON OFF Status Execute Execute Black Blue ViewSonic Status OFF ON Status OFF ON Status Normal Eco Status OFF ON Status Command 0x06 0x14 0x00 0x04 0x00 0x34 0x11 0x00 0x00 0x5D 0x06 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 84
Function Type Projector Position Write Read 3D Sync Write Read 3D Sync Invert Write Read Contrast Write Read Brightness Write Read Action Front Table Rear Table Rear Ceiling Front Ceiling Status OFF Auto Frame Sequential Frame Packing Top Bottom Side by Side Status OFF ON Status - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 85
Function Type Aspect ratio Write Auto Adjust Read Write Horizontal position Write Read Vertical position Write Read Color temperature Write Read Blank Write Read Action Auto 4:3 16:9 16:10 2.35:1 Cycle Get Value Execute Shift Right Shift Left Get Value Shift Up Shift Down Get Value - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 86
Function KeystoneVertical Type Write Read Color mode Write Read Primary Color Write Read Write Hue Read Action Decrease Increase Get value Brightest Movie Standard Cycle Photo Presentation Status R G B C M Y Status Decrease Increase Get value Command 0x06 0x14 0x00 0x04 0x00 0x34 0x12 0x0A - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 87
Function Saturation Type Write Read Gain Write Read Sharpness Write Read Freeze Write Read Source input Write Read Quick Auto Search Write Read Action Decrease Increase Get value Decrease Increase Get value Decrease Increase Get value ON OFF Status D-Sub / Comp. HDMI 1 HDMI 2 HDMI 3 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 88
Function Mute Type Write Read Volume Write Read Language Write Action ON OFF Status Increse Decrese Write Value Get Value Command 0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x00 0x01 0x61 0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x00 0x00 0x60 0x07 0x14 0x00 0x05 0x00 0x34 0x00 0x00 0x14 0x00 0x61 0x06 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 89
Function Type Language Write Light Source Hours Reset Read Write Read HDMI Format Write Read HDMI Range Write Read Action Vie Status Reset to ZERO Get Usage Time RGB YUV Auto Status Enhanced Normal Auto Status Command 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x0d 0x6E 0x06 0x14 0x00 0x04 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 90
Function Type CEC Error status Write Read Read Brilliant Color Write Read Remote Control Code Write Action OFF ON Status Status OFF Color 1 Color 2 Color 3 Color 4 Color 5 Color 6 Color 7 Color 8 Color 9 Color 10 Status code 1 code 2 code 3 code 4 code 5 code 6 85 Command 0x06 0x14 0x00 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 91
Function Type Remote Control code Write Read Screen Color Write Read Over Scan Write Read Action code 7 code 8 Status OFF Blackboard Greenboard Whiteboard Status OFF Value 1 Value 2 Value 3 Value 4 Value 5 Get Value Command 0x06 0x14 0x00 0x04 0x00 0x34 0x0C 0x48 0x06 0xA6 0x06 0x14 0x00 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 92
Function Type Remote Key Write AMX Write Action Menu Exit Top Bottom Left Right Source Enter Auto AMX response Command 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0F 0x61 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x13 0x65 0x02 0x14 0x00 0x04 0x00 0x34 0x02 0x04 0x0B 0x5D 0x02 0x14 0x00 0x04 0x00 - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 93
http://www.viewsoniceurope.com/eu/support/call-desk/ Hong Kong www.hk.viewsonic.com T= 852 3102 2900 [email protected] India www.in.viewsonic.com T= 1800 419 0959 [email protected] Korea ap.viewsonic.com/kr/ T= 080 333 2131 [email protected] Latin America (Argentina - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 94
warranty period, ViewSonic will, at General Warranty ViewSonic's standard provided by ViewSonic . Please refer to the ViewSonic website local ViewSonic office follow instructions supplied anyone not authorized by ViewSonic. e. Any damage of or parts not meeting ViewSonic's specifications. i. Normal - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 95
, contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 96
modification, unauthorized attempted repair, or failure to follow instructions supplied with the product. b. A ny damage service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 97
39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Sonora #3780 L-C Col 20 de Noviembre Tijuana, Mexico FOR USA SUPPORT: ViewSonic Corporation 14035 Pipeline Ave. Chino, CA 91710, USA Tel: 800-688-6688 (English - ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 98
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
 |
 |
LS900WU
DLP Projector
User Guide
Model No. VS17642
IMPORTANT: Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://
www.viewsonic.com in English, or in specific languages using the Regional selection
box in the upper right corner of our website. “Antes de operar su equipo lea cu
idadosamente las instrucciones en este manual”