ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 47
Using the projector in standby mode, Adjusting the sound
View all ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keystone and Lens Shift manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under POWER MANAGEMENT > Standby Settings, and the cable connections are correctly made. For the connection methods, see the Connection chapter. Standy mode When HDBaseT switch on, Standby Settings mode will change to Normal. Green mode Power consumption Audio Settings > Mute menu. 2. Press / to select On. If available, you can press and off. on the remote control to toggle the projector audio between on Adjusting the sound level 1. Open the OSD menu and go to the BASIC > Audio Settings > Audio Volume menu. 2. Press / to select a desired sound level. If available, you can press or on the remote control to adjust the projector's sound level. Microphone: On / Off Enable or Disable microphone function. When microphone plugged in and auto detected, priority is higher than Audio In to Audio Out. 42