ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 71
Setting Power Saving
View all ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keystone and Lens Shift manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Setting Power Saving 5he projector lowers the power consumption if no input source is detected after 5 minutes to prevent unnecessary waste of light source life. You can further decide if you would like the projector to turn off automatically after a set period of time. 1. Open the OSD menu and go to the POWER MANAGEMENT > Smart Energy menu 2. Press Enter and the Smart Energy page is displayed. 3. Highlight Power Saving and press / . 4. When Enable is selected, the projector light source will be changed to Eco mode after no signal is detected for 5 minutes. 66
66
Setting Power Saving
T
he projector lowers the power consumption if no input source is detected after 5 minutes to
prevent unnecessary waste of light source life. You can further decide if you would like the
projector to turn off automatically after a set period of time.
1.
Open the OSD menu and go to the
POWER MANAGEMENT
>
Smart Energy
menu
.
2.
Press
Enter
and the
Smart Energy
page is displayed.
3.
Highlight
Power Saving
and press
/
.
4.
When
Enable
is selected, the projector light source will be changed to
Eco
mode after
no signal is detected for 5 minutes.