ViewSonic LS900WU - 6000 Lumens WUXGA Networkable Laser Projector with HV Keysto - Page 63

Page 63 highlights

1. DISPLAY menu Description of each menu Function Screen Color Aspect Ratio Description See "Using Screen Color" on page 36 for details. This function is only available when a PC input signal is selected. See "Selecting the aspect ratio" on page 34 for details. Keystone See "Correcting keystone" on page 32 for details. Corner Adj. Position See "Adjusting 4 corners" on page 33 for the details. Displays the position adjustment page. To move the projected image, use the directional arrow keys. The values shown on the lower position of the page change with every key press you made until they reach their maximum or minimum. This function is only available when a PC input signal is selected. The adjustment range may vary under different timings. Adjusts the clock phase to reduce image distortion. Phase H. Size Zoom OverScan 3X Fast Input This function is only available when a PC input signal is selected. Adjusts the horizontal width of the image. This function is only available when a PC input signal is selected. See "Magnifying and searching for details" on page 33 for details. Adjusts the overscan rate from 0% to 5%. This function is only available when a Composite Video or HDMI input signal is selected. Selecting Active enables the function. This function is favorable to frame rate reducing. Quick response time in native timing can be achieved. When enabled, the following settings will return to factory preset values: Aspect Ratio, Keystone, Corner, Position, Zoom, OverScan. This function is only available when a native timing input signal is selected. 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
58
Description of each menu
Function
Description
1. DISPLAY menu
Screen Color
See
"Using
Screen Color" on page 36
for details.
This function is only available when a PC input signal is
selected.
Aspect Ratio
See
"Selecting the aspect ratio" on page 34
for details.
Keystone
See
"Correcting keystone" on page 32
for details.
Corner Adj.
See
"Adjusting 4 corners" on page 33
for the details.
Position
Displays the position adjustment page. To move the projected
image, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you made
until they reach their maximum or minimum.
This function is only available when a PC input signal is
selected.
The adjustment range may vary under different timings.
Phase
Adjusts the clock phase to reduce image
distortion.
This function is only available when a
PC input signal is selected.
H. Size
Adjusts the horizontal width of the image.
This function is only available when a PC input signal is
selected.
Zoom
See
"Magnifying and searching for details" on page 33
for details.
OverScan
Adjusts the overscan rate from 0% to 5%.
This function is only available when a Composite Video or
HDMI input signal is selected.
3X Fast Input
Selecting Active enables the function. This function is favorable to
frame rate reducing. Quick response time in native timing can be
achieved. When enabled, the following settings will return to
factory preset values:
Aspect Ratio
,
Keystone
,
Corner
,
Position
,
Zoom
,
OverScan
.
This function is only available when a native timing input
signal is selected.