ViewSonic PA502X PA502S User Guide English - Page 30

Switching input signal, Quick Auto, Search, SYSTEM

Get ViewSonic PA502X PDF manuals and user guides View all ViewSonic PA502X manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. If you want the projector to automatically search for various signals, please confirm that the Quick Auto Search function in the SYSTEM menu is switched ON. You may also press the source selection button on the remote control or search for available input signals to manually select the desired signals. 1. Press [Source] to display the source selection column. 2. Keep pressing the / until you arrive at the desired signal, then press [Enter]. Once detected, the selected source information will display on the screen for seconds. If there are multiple devices connected to the projector, repeat steps 1 to 2 to search for another signal. For display resolutions of this projector, please refer to "Projector specifications". To achieve the best image display effects, you should select and use an input signal that outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the aspect ratio setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" for details. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
23
Switching input signal
The projector can be connected to multiple devices
at the same time. However, it can only display one
full screen at a time.
If you want the projector to automatically search for
various signals, please confirm that the
Quick Auto
Search
function in the
SYSTEM
menu is switched
ON
.
You may also press the source selection button
on the remote control or search for available input
signals to manually select the desired signals.
1.
Press [Source] to display the source selection
column.
2.
Keep pressing the
/
until you arrive at the
desired signal, then press [Enter].
Once detected, the selected source information will display on the screen for
seconds. If there are multiple devices connected to the projector, repeat steps 1 to 2
to search for another signal.
For display resolutions of this projector, please refer to
“Projector specifications”
.
To achieve the best image display effects, you should select and use an input signal that
outputs at this resolution. Any other resolutions will be scaled by the projector depending upon
the aspect ratio setting, which may cause some image distortion or loss of picture clarity. See
“Selecting the aspect ratio”
for details.