ViewSonic PJ513D PJ513DB User Guide

ViewSonic PJ513D Manual

Get ViewSonic PJ513D PDF manuals and user guides View all ViewSonic PJ513D manuals
Add to My Manuals
Save this manual to your list of manuals

ViewSonic PJ513D manual content summary:

  • ViewSonic PJ513D | PJ513DB User Guide - Page 1
    ViewSonic® PJ513D/PJ513DB DLP Projector IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited
  • ViewSonic PJ513D | PJ513DB User Guide - Page 2
    radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that , but use the return and collection systems according to local law. ViewSonic  PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 3
    guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer's instructions an electrician for replacement of the obsolete Refer all servicing to qualified service personnel. Servicing is required when ViewSonic ii PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 4
    below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic iii PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 5
    Product Name: Model Number: Document Number: Serial Number: Purchase Date: PJ513D/DB ViewSonic DLP Projector VS11959 PJ513D/DB_UG_ENG Rev. 1B 01-30-08 The lamp in this product contains mercury. Please dispose of in accordance with local, state or federal laws. ViewSonic iv PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 6
    25 Locking control keys 25 Freezing the image 26 Operating in a high altitude environment 26 Adjusting the sound 27 Personalizing the projector menu display 27 Shutting down the projector 28 Menu operation 29 Maintenance 37 Care of the projector 37 Lamp information 38 Troubleshooting 44
  • ViewSonic PJ513D | PJ513DB User Guide - Page 7
    contact your place of purchase. Standard accessories 1. Projector 2. Card type remote control and battery (1) 3. Quick start guide and ViewSonic (2) Wizard CD 4. VGA cable (4) 5. Power cord Optional accessories (5) (3) 1. Spare lamp kit 2. Soft carry case ViewSonic 1 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 8
    7. 8. External control panel (See "Projector" on page 3 for details.) Vent (heated air exhaust) Front IR remote sensor Quick-release button control port 17. Video input socket 18. Audio socket 19. Quick-release foot 20. Lamp cover 21. Ceiling mounting screw holes 21 9 ViewSonic 2 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 9
    . 9. Lamp indicator light 5. SOURCE Indicates the status of the lamp. Lights up Displays the source selection bar. See or flashes when the lamp has developed a "Switching input signal" on page 18 for problem. See "Indicators" on page 42 for details. details. ViewSonic 3 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 10
    the image, press any button on the projector or remote control. See "Hiding the image" on page 25 for details. 11. Right/PANEL KEY LOCK Activates panel key lock. See "Locking control keys" on page 25 for details. menu item. See "Using the menus" on page 31 for details. ViewSonic 4 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 11
    Remote control 7. Keystone/Arrow buttons ( / Up, / Down) 6 Manually corrects distorted images 1 7 resulting from an angled image. To restore the image, press any button on the projector or remote control. 5. DIGITAL ZOOM buttons (+, -) Magnifies or reduces the ViewSonic 5 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 12
    's instructions. • Never throw a battery into a fire. There may be danger of an explosion. • If the battery is dead or if you will not be using the remote control for a long time, remove the battery to prevent damage to the remote control from possible battery leakage. ViewSonic 6 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 13
    the projector for quick setup and portability. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase a recommended Projector Ceiling Mounting Kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in
  • ViewSonic PJ513D | PJ513DB User Guide - Page 14
    plane of the projector. When ceiling mounted, this refers to the top edge of the projected image. If the projector is positioned projector. There are two dimensions to consider, the perpendicular horizontal distance from the center of the screen (projection distance), ViewSonic 8 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 15
    fit the 9' size screen, or increased to fit the 10' size screen. The projector can be adjusted (using the zoom control) to display on these different screen sizes at those projection distances. Be aware that these different screens have different vertical offset values. ViewSonic 9 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 16
    size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location. ViewSonic 10 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 17
    the audio output socket of the computer, and the other end to the Audio socket of the projector. The final connection path should be like that shown in the following diagram: Laptop or desktop to your notebook's documentation to find your notebook's key combination. ViewSonic 11 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 18
    D-Sub input is made to the projector. If you wish to use this connection method when the projector is in standby mode, make sure the Active VGA out function is turned on in the SYSTEM SETUP: Advanced menu. See "SYSTEM SETUP: Advanced menu" on page 35 for details. ViewSonic 12 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 19
    , instead of to the mono audio projector. The audio connections illustrated in the following sections are provided for informational purposes only. You need not connect audio to the projector if there is an alternate sound system available, or if audio is not required. ViewSonic 13 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 20
    . • If the selected video image is not displayed after the projector is turned on and the correct video source has been selected, check that the Video source device is turned on and operating correctly. Also check that the signal cables have been connected correctly. ViewSonic 14 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 21
    already made a Component Video connection between the projector and this S-Video source device using Component Video connections, you need not connect to this device using an S-Video connection as this makes an unnecessary second connection of poorer picture quality. ViewSonic 15 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 22
    , you will need to reassess which method you can use to connect to the device. To connect the projector to an composite Video source device: 1. Take a Video cable and connect one end to the composite Video if Component Video and S-Video inputs are unavailable for use. ViewSonic 16 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 23
    on, it could become deformed due to the heat produced by the projection lamp. PUSH 3. Press Power on the projector or remote control to start the projector. The Power indicator light flashes green and stays green when the projector is on. The start up procedure takes about 30 seconds. In the later
  • ViewSonic PJ513D | PJ513DB User Guide - Page 24
    is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input sources. 1. Press SOURCE on the projector or remote control. A source selection bar displays. 2. Press / until your desired
  • ViewSonic PJ513D | PJ513DB User Guide - Page 25
    projector. Once the image is positioned where you want it, release the quick-release button to lock the foot in position. Do not look into the lens while the lamp is on. The strong light from the lamp , press AUTO on the projector or remote control. Within 3 seconds, the ViewSonic 19 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 26
    size is suitable for your need. 2. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. The picture can only be navigated after the picture is magnified. You can further magnify the picture while searching for details. ViewSonic 20 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 27
    5. Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture. 6. To reduce size of the picture, inactive areas and the white portions are active areas. 1. Auto: Scales an image to fit the projector's native resolution(4:3). This . ViewSonic 21 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 28
    suits your need, you can follow one of the following steps. • Press MODE/ENTER on the remote control or projector repeatedly until your desired mode is selected. • Go to the PICTURE > Preset Mode menu and See "Setting the User 1/User 2 mode" on page 23 for details. ViewSonic 22 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 29
    values by pressing / on the projector or remote control. The higher the value, the greater the contrast. Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment. ViewSonic -30 50 23 +70 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 30
    Color Highlight Color in the PICTURE menu and adjust the values by pressing / on the projector or remote control. Lower setting produces less saturated colors; setting to the minimum value makes the image black and white. If the setting is too high, colors on the image will be overpowering, which
  • ViewSonic PJ513D | PJ513DB User Guide - Page 31
    pressed, the projector lamp enters Economic mode remote control are still in use when panel key lock is enabled. • If you press POWER to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. ViewSonic 25 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 32
    on the projector or remote control. Even if projector from over-heating. In cases like this, you should switch to High Altitude mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions. ViewSonic 26 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 33
    2. Press to highlight Audio Settings and press MODE/ENTER on the projector or Mode/enter on the remote control. The Audio Settings page displays. 3. Highlight Mute and press / a preferred logo screen to be displayed during projector start-up. Use / to select a screen. ViewSonic 27 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 34
    . • If the projector is not properly shut down, to protect the lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press Power again to start the projector after the fans stop and the Power indicator light turns orange. ViewSonic 28 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 35
    source: Brightest/ Standard/Cinema/User 1/User 2 PC source: Brightest/ Presentation/Photo/Cinema Video source: Brightest/ Standard/Cinema On/Off T1/T2/T3/T4 On/Off ViewSonic 29 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 36
    Preset Mode • Resolution • Color System • Equivalent Lamp Hour Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the projector or no signal detected, limited menu items are accessible. ViewSonic 30 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 37
    the image shape displayed on the screen, press the keystone buttons ( / , / ) to adjust the image to a rectangular or square one. 6. Press MENU/EXIT on the projector or remote control to leave and save the settings. Analog RGB ViewSonic MENU Exit 31 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 38
    YPbPr/ S-Video/ Video: Standard) Pre-defined preset modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a preset mode" on page 22 for brightness of the image. See "Adjusting Brightness" on page 23 for details. ViewSonic 32 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 39
    for User 1 or User 2 mode. SOURCE menu FUNCTION (default setting / DESCRIPTION value) Quick Auto Search (On) See "Switching input signal" on page 18 for details. ViewSonic 33 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 40
    on the projector and buttons on the remote control. See "Locking control keys" on page 25 for details. Splash Screen (VS) Allows you to select which logo screen will display during projector start-up. Three options are available: VS, Black screen, or Blue screen. ViewSonic 34 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 41
    DCR (Dynamic Contrast Ratio) function. Selecting On enables the function and the projector will automatically switch the lamp mode between normal and economic mode according to the input image detected. Position (Center) Sets the On-Screen Display (OSD) menu position. ViewSonic 35 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 42
    in the PICTURE menu. Resolution Shows the native resolution of the input signal. Color system Shows input system format, NTSC, PAL, SECAM, or RGB. Equivalent lamp hour Displays the number of hours the lamp has been used. ViewSonic 36 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 43
    projector except the lamp. Contact your dealer if other parts need replacing. remote control. • Pack the projector in its original packing or equivalent. Transporting the projector It is recommended that you ship the projector with its original packing or equivalent. ViewSonic 37 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 44
    with proper usage. To keep the lamp life as long as possible, you can do the following settings via the OSD menu. • Setting Lamp Mode as Economic Using Economic mode presentation, select Disable. The projector will not automatically shut down in a certain time period. ViewSonic 38 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 45
    diminished. If the lamp is not replaced beforehand, it must be replaced after 3000 hours usage. Notice Out of Lamp-Usage Time The lamp MUST be replaced before the projector will operate normally. Replace lamp (refer to User manual) Then reset lamp timer OK ViewSonic 39 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 46
    in locations where water might splash on it, children can reach it, or near flammable materials. Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected pictures. PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 47
    Reset Lamp Timer. iii. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and 12. Replace the lamp cover on the projector. press MODE/ENTER. The lamp time will be reset to '0'. Notice Reset lamp timer? Reset Cancel ViewSonic 41 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 48
    for assistance. The projector has shutdown automatically. If you try to re-start R the projector, it will shutdown again. Please contact your dealer for assistance. 1. The projector needs 90 seconds to cool down. Or R 2. Please contact your dealer for assistance. ViewSonic 42 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 49
    Thermal events - R - - R R - R G R O R RR R RG R RO The projector has shutdown automatically. If you try to re-start G R R the projector, it will shutdown again. Please contact your dealer for assistance. G RG G RO O R R O R G O R O - G R - G G ViewSonic 43 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 50
    work Cause The batteries are out of power. There is an obstacle between the remote control and the projector. You are too far away from the projector. Remedy Replace the batteries with new ones. Remove the obstacle. Stand within 8 meters (26 feet) of the projector. ViewSonic 44 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 51
    Product name Model name Digital Projector PJ513D/PJ513DB Optical Resolution Display system Lamp 800 x 600 SVGA 1-CHIP DMD 180W lamp Electrical Power supply Power consumption AC100 at 25°C+5°C (must be operational and the reliability decrease is acceptable) ViewSonic 45 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 52
    Dimensions 263 mm (W) x 108 mm (H) x 218 mm (D) Unit: mm 263 108 218 64.5 66.3 ViewSonic 46 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 53
    33.75 28.13 59.94 59.94 50.00 50.00 60.00 50.00 60.00 50.00 Supported timing for Video and S-Video inputs Video mode Horizontal Frequency (kHz) Vertical Frequency (Hz) NTSC 15.73 60 60 Color subcarrier Frequency (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 ViewSonic 47 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 54
    Africa www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm United Kingdom United States www.viewsoniceurope.com/uk/ www.viewsonic.com www.viewsoniceurope.com/uk/Support/Calldesk.htm T= 1-800-688-6688 F= 1-909-468-1202 [email protected] ViewSonic 48 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 55
    (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic. ViewSonic 49 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 56
    purpose. Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: . viewsoniceurope.com under Support/Warranty Information. 4.3: Projector Warranty ViewSonic PRJ_LW01 Rev. 1h 06-25-07 50 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 57
    service charges. How to get service: For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to the attached Customer Support by any other party. 4. Repair or attempted repair by anyone not authorized by ViewSonic. ViewSonic 51 PJ513D/PJ513DB
  • ViewSonic PJ513D | PJ513DB User Guide - Page 58
    Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic Services USA SUPPORT: ViewSonic
  • ViewSonic PJ513D | PJ513DB User Guide - Page 59
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
ViewSonic
®
PJ513D/PJ513DB
DLP Projector
IMPORTANT:
Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
product for future service.
Warranty information contained in this User Guide will
describe your limited coverage from ViewSonic Corporation, which is also found
on our web site at http://www.viewsonic.com in English, or in specific languages
using the Regional selection box in the upper right corner of our website.
“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”
- User Guide
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
-
使用手冊 (繁體)
-
使用手冊 (簡體)
-
사용자 안내서
Model No. : VS11959