ViewSonic PJ513D PJ513DB User Guide - Page 38
DISPLAY menu, PICTURE menu, Aspect Ratio, Keystone, Position, Phase, H. Size, Digital Zoom
View all ViewSonic PJ513D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
DISPLAY menu FUNCTION (default setting/ value) Aspect Ratio (Auto) Keystone (0) Position (0) Phase (depends on the selected input source) DESCRIPTION (default setting/value) There are four options to set the image's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 21 for details. Corrects any keystoning of the image. See "Correcting keystone" on page 20 for details. Displays the position adjustment page. To move the projected image, use the directional arrow buttons. The values shown on the lower position of the page change with every button press you made until they reach their maximum or minimum. Adjusts the clock phase to reduce image distortion. H. Size (depends on the selected input source) Digital Zoom (100%) Adjusts the horizontal width of the image. Magnifies or reduces the projected image. See "Magnifying and searching for details on the projected picture" on page 20 for details. PICTURE menu Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen. FUNCTION (default setting / DESCRIPTION value) Preset Mode (PC: Brightest; YPbPr/ S-Video/ Video: Standard) Pre-defined preset modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a preset mode" on page 22 for details. Reference Mode Brightness Selects an preset mode that most suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 23 for details. Adjusts the brightness of the image. See "Adjusting Brightness" on page 23 for details. ViewSonic 32 PJ513D/PJ513DB