ViewSonic PJD6350 PJD6552LWS User Guide English - Page 37
Magnifying and searching for details, Selecting the aspect ratio, About the aspect ratio
View all ViewSonic PJD6350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
3. Press the button that represents the corner you wish to adjust and press Enter. 4. Press / to select an adjustment method that suits your need and press Enter. 5. Press / / / to adjust its shape and size. During this process, you can press Menu or Exit to go back to a previous step. A long press for 2 seconds on Enter will reset the settings. Adjusting keystone or aspect ratio will reset the Corner Adj. settings. Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • Using the remote control 1. Press on the remote control to display the Zoom bar. 2. Press repeatedly to magnify the picture to a desired size. 3. To navigate the picture, press Enter to switch to the paning mode and press the directional arrows ( , , , ) to navigate the picture. 4. To reduce size of the picture, press Enter to switch back to the zoom in/out functionality, and press repeatedly until it is restored to the original size. You can also press Auto Sync on the remote control to restore the picture to its original size. • Using the OSD menu 1. Open the OSD menu and go to the DISPLAY > Zoom menu. 2. Press Enter. The Zoom bar is displayed. 3. Repeat steps 2-4 in the section of Using the remote control above. This function is only available when a PC input signal is selected. The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details. Selecting the aspect ratio The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal. To change the projected image ratio (no matter what aspect the source is): 1. Open the OSD menu and go to the DISPLAY > Aspect Ratio menu. 2. Press / to select an aspect ratio to suit the format of the video signal and your display requirements. About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 30