ViewSonic PJD6350 PJD6552LWS User Guide English - Page 52

Adjusting the sound, Adjusting the audio mode

Get ViewSonic PJD6350 PDF manuals and user guides View all ViewSonic PJD6350 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Active VGA Out Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN 1. Active Audio Out Selecting On outputs an audio signal when the AUDIO IN 1 socket is correctly connected to a proper device. LAN Control Selecting On allows the projector to provide the network function when it is in standby mode. See "Controlling the projector through a LAN environment" on page 39 for details. Adjusting the sound The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page 15 for more details. Adjusting the audio mode 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio Mode menu. 2. Press / to select a preferred audio mode. If available, you can press Audio Mode on the remote control to select a preferred audio mode. Muting the sound 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Mute menu. 2. Press / to select On. If available, you can press and off. on the remote control to toggle the projector audio between on Adjusting the sound level 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio Settings > Audio Volume menu. 2. Press / to select a desired sound level. If available, you can press on the remote control to adjust the projector's sound level. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
45
Active VGA Out
Selecting
On
outputs a VGA signal when the
COMPUTER IN 1
and
COMPUTER OUT
sockets are correctly connected to devices. The projector outputs the signal received only
from
COMPUTER IN 1
.
Active Audio Out
Selecting
On
outputs an audio signal when the
AUDIO IN 1
socket is correctly connected
to a proper device.
LAN Control
Selecting
On
allows the projector to provide the network function when it is in standby
mode. See
"Controlling the projector through a LAN environment" on page 39
for details.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker. Be sure
you have made a correct connection to the projector audio input/output jacks. See
"Connection" on page 15
for more details.
Adjusting the audio mode
1.
Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED
>
Audio
Settings
>
Audio Mode
menu.
2.
Press
/
to select a preferred audio mode.
If available, you can press Audio Mode on the remote control to select a preferred audio mode.
Muting the sound
1.
Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED
>
Audio
Settings
>
Mute
menu.
2.
Press
/
to select
On
.
If available, you can press
on the remote control to toggle the projector audio between on
and off.
Adjusting the sound level
1.
Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED
>
Audio
Settings
>
Audio Volume
menu.
2.
Press
/
to select a desired sound level.
If available, you can press
on the remote control to adjust the projector’s sound level.