ViewSonic SC-Z55 SC-Z55 User Guide (English) - Page 16
Positioning Your SC-Z55
View all ViewSonic SC-Z55 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting Up Your SC-Z55 Positioning Your SC-Z55 2.1 Positioning Your SC-Z55 There are two ways to position your SC-Z55: • Put it (with its stand) on a desk or a desired place uprightly. • Mount it on the back of a monitor using a VESA mount kit. To mount your SC-Z55 on the back of a monitor, please follow the steps below: Step 1: Remove the Stand from Your SC-Z55 Step 2: Understand Your Stand / VESA Mount Kit for SC-Z55 Step 3: Store Away Screws inside the Bracket Step 4: Remove Screws from the Bracket Step 5: Mount Your SC-Z55 Step 1: Remove the Stand from Your SC-Z55 To remove the stand from your SC-Z55, please do the following: 1. Place your SC-Z55 on a flat surface with the stand side upward. 2. Remove the screw that fixes the stand to your SC-Z55. 3. Store away the removed screw inside the stand. Detailed instructions will be provided in Step 2 and 3. Inp台ut 5造V /3MAade in Taiwan JPAA NOTE • It's highly recommended to store screws away inside the stand when not needed to prevent them getting lost. 8