ViewSonic V1250 User Guide - Page 39
Replace the Memory Slot Cover and the Screw. You have now
UPC - 766907001518
View all ViewSonic V1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4 Locate the memory expansion slot cover on the back of the Tablet PC shown below. Remove the screw. Lift the memory door off the system. Attention: Notice the notch on the extracted module. The notch's off-center placement allows the module to fit into the socket only in one orientation. The replacement module will be similarly notched to help you place it properly into its slot. To install the new module, place it into the memory socket. The module will only fit in one orientation. Insert the module at an angle of approximately 30 degrees into the empty memory socket. Then press it firmly so that the contact edge is driven fully into the receiving socket. Pivot the module until the latches on both sides of the socket snap into place. (You will feel it solidly click into place.) Replace the Memory Slot Cover and the Screw. You have now completed the memory upgrade. ViewSonic Tablet PC V1250 35