ViewSonic VA2016W Service Manual - Page 13
ViewSonic Corporation, 6-3 MAIN MENU OSD TABLE, Loop: DCR On <=> DCR Off
View all ViewSonic VA2016W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
(refer to segment 4-6-5) [▲] 1. Long Press [up] key 3 seconds to switch DCR On/Off, 2. Loop: DCR On DCR Off When switch to DCR ON When switch to DCR OFF 3. DCR Off in Factory mode. 4. Reset to default when re-power on/off 5. Message will appear only after Hot Key is pressed [1]+ [ ] All reset No signal + [ ] + [2] Burning mode Signal + [2] + [ ] Factory Mode Remark : All the short cuts function are only available while OSD off 2-6-3 MAIN MENU OSD TABLE Main Menu Level 1 Auto Image Adjust 1. Key button definition: [1]: OSD off [2]: Execute the selected function [Up]: Rolling up the slider (When push the button on the top position, the slider shall go down to the bottom item) [Dn]: Rolling down the slider Level 2 Level 3 1. Background = blanking 2. The message OSD position is at the center. 3. After auto tune, OSD shall be off 4. Only for analog mode Contrast/Brightness Contrast ViewSonic Corporation 10 Confidential - Do Not Copy VA2016w-2