ViewSonic VA2016W Service Manual - Page 45
ViewSonic Corporation, Factory Mode Introduction, Burn-in pattern
View all ViewSonic VA2016W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Factory Mode Introduction When signal is input, press "power key" to turn off the monitor. Press "-" and "Power" together to turn on the monitor. After power on, press "Power" to call out Main Menu, then press "-"for select the "F" item, then press "power/menu", you can go into Factory mode. EXIT: Escape from Factory menu. PANEL: Display panel information. AUTO COLOR: Automatically calibrate chip ADC parameter by using chip internal DAC. GAIN: ADC gain value OFFSET: ADC offset value SPAN and STEP: Spread spectrum value. BRI: Brightness value CON: Contrast value 9300K: Set color temperature 9300K 6500K: Set color temperature 6500K USER: Set user preferred color temperature RS232: F/W RS232 debug on or off BANK, ADDR, VALUE, HTOTAL:F/W adjust the scaler register and htotal to panel for better performance. TIME: The time of backlight used. 4. Burn-in pattern Enter the factory mode, Plug out VGA, Burn-in pattern will self generate automatically. You can not escape from Burn-in pattern until plug in VGA Cable or press the Menu/Power key,. 5. Auto Color Balance (Automatically calibrate chip ADC parameter by using chip internal DAC.) If it is a new-built set and it is first time to do the "auto color", please confirm the following steps: -Connect the VGA cable with the standard video pattern generator and display 32-gray pattern on the monitor. - Press "Power" to power off the monitor. - Enter the Factory Mode. - Then press the "Menu/POWER" to execute Auto Color item. - After the "Auto Color" process finished, please press "Power" to restart monitor. ViewSonic Corporation 42 Confidential - Do Not Copy VA2016w-2