ViewSonic X1000-4K - Ultra-Short Throw 4K UHD Projector with 2400 LED Lumens USB - Page 18
Mounting the Projector, Maximum Screw Length: 10 mm
View all ViewSonic X1000-4K - Ultra-Short Throw 4K UHD Projector with 2400 LED Lumens USB C Bluetooth Speakers and Wi-Fi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Mounting the Projector NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to attach the mount to the projector meet the following specifications: • Screw type: M6 x 10 • Maximum Screw Length: 10 mm CAUTION: • Avoid installing the projector near a heat source or air conditioner. • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector. 18
18
Moun°ng the Projector
NOTE:
If you buy a third party mount, please use the correct screw size. Screw
size can vary depending on the thickness of the moun°ng plate.
1.
To ensure the most secure installa°on, please use a ViewSonic® wall or ceiling
mount.
2.
Ensure the screws used to a²ach the mount to the projector meet the following
specifica°ons:
• Screw type: M6 x 10
•
Maximum Screw Length: 10 mm
CAUTION:
•
Avoid installing the projector near a heat source or air condi°oner.
•
Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bo²om of
the projector.