Viper 3105V Owner Manual - Page 14

High Security Disarm High Security Disarm makes it possible to silence and reset the system when it is triggering, without disarming. If the system is triggered, and the siren sounds for longer than six seconds, pressing will stop the trigger and return the system to an armed state. The system does not disarm, but rather reset. This prevents you from disabling the system should you want to disarm without visually checking the vehicle. Pressing again after resetting the system, will disarm the system. Pressing during the first six seconds of the triggered sequence disarms the system immediately. The six second timer is provided for your convenience, in case you accidentally trigger the system. Disarming without a transmitter This feature allows you to disarm the security system without the remote transmitter should it be lost, damaged, or disabled. In order to disarm the system without a remote transmitter, you must have the vehicle's ignition key and know where the Valet button is located. Be sure to check with the installer for the location and the number of presses of the Valet button required to disarm the system. To disarm the security system: 1. Turn the ignition to the ON position. 2. Press and release the Valet button the preset number of times (one, the factory setting, to five times) within 15 seconds. After five seconds the system disarms. If the system does not disarm, you may have waited too long. Turn the ignition off and on and try again. © 2012 Directed. All rights reserved. 11