Viper 5002 Owner Manual - Page 46
programming
View all Viper 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
programming Programming options control what your system does during normal operation, and require few or no additional parts. However, some may require additional installation labor. The following is a list of the program settings, with the factory settings in Bold: ➤ Active arming (only with the remote) or passive arming (automatic arming 30-seconds after the last door has been closed). ➤ Arming/disarming confirmation siren chirps on or off. ➤ The ignition controlled door lock feature on or off: With this feature on, the doors will lock three seconds after the ignition is turned on, and the doors are closed, and unlock when the ignition is turned off. The system will not lock the doors when the ignition is turned on with any door open. The bitwriter is not needed to program theses separately, it should be in the programming grid to do these 2 independently. Ignition lock and unlock are independent features and can be programmed separately. ➤ Passive door locking (with passive arming) or active door locking (only when arming with the remote). Passive locking allows the vehicle's doors to lock when the security system passively arms (after the 30 second countdown). This feature only works if passive arming has been programmed. © 2006 directed electronics 41