Viper 5002 Owner Manual - Page 53
disarming the vrs
View all Viper 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
➜ disarming the vrs® Take the time to familiarize yourself with the VRS® triggering sequence and the disarm procedure. It is important to recognize and identify the VRS® trigger sequence and know how to disarm it in case of accidental activation. Once the VRS® is armed, it does not disarm automatically. You must disarm it the next time you operate the vehicle. You must disarm it with one of the following procedures: If the system has not entered the triggered sequence (siren has not started chirping): 1. Turn the ignition on. 2. Press on the transmitter for one second. The lights will flash and the siren will chirp twice. If the system has entered the triggered sequence (siren has begun chirping), pressing the disarm button of the transmitter will not disarm VRS®. To disarm the VRS® during a VRS® trigger sequence: 1. Turn the ignition on. 2. Press the Valet button the pre- programmed number of times to DRW-35 disarm the VRS® system. note: If the VRS® system has begun its chirping sequence, the ignition must be turned off, then on to disarm. If you are driving the vehicle at the time, pull to a safe place away from traffic and follow the triggered sequence disarm procedure. 48 © 2006 directed electronics