Vizio XMF1000 Quick Installation Guide - Page 14
Pencil Marks
View all Vizio XMF1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
5. Remove the bar, the leveler, and the unattached bracket (part A) from the wall. Allow the attached bracket to swing down. 1/2" Using the power drill and the 1/2" concrete drill bit, drill into the 3 pencil marks as shown. Drill each hole about 2 1/2" deep. 6. Remove 3 anchors from the pouch labeled ANCHOR. Push the anchors into the holes you just drilled. Ensure the anchors are completely inserted and flush with the wall. 12 5 Pencil Marks 6
5. Remove the bar, the leveler, and the unattached bracket (
part A
)
from the wall.
Allow the attached bracket to swing down.
Using the power drill and the 1/2” concrete drill bit, drill into the
3 pencil marks as shown. Drill each hole about 2 1/2” deep.
6. Remove
3 anchors
from the pouch labeled
ANCHOR
.
Push the anchors into the holes you just drilled. Ensure the
anchors are completely inserted and flush with the wall.
5
Pencil Marks
6
1/2”
12