Vtech 3111-2 User Manual - Page 9

Installation • If the registration is not successful, the display will show NOT REGISTERED. To reset the handset, remove the handset from the telephone base or charger and place it back in. Try the registration process again. • You cannot register a handset if any system handset is in use. Adding a new handset Your telephone can accomodate up to five cordless handsets. You can add new handsets (DS3101, purchased separately) to the DS3111-2/TM3111-2/DS31113/DS3111-4 at any time, but each handset must be registered with the telephone base before use. The DS3111-2/TM3111-2/DS3111-3/DS3111-4 comes with two/three/four registered handsets (named HANDSET 1, 2, 3 and 4). Additional handsets will be assigned numbers in the order they are registered (HANDSET 3, 4 and 5). You can register a maximum of five handsets. Before using a new DS3101 handset, you must register it with the telephone base. Each handset must be registered separately. To register a handset to your telephone base When first purchased, all optional accessory handsets show NOT REGISTRED on the screen. The handset may need to be charged for at least five minutes before registering to the telephone base. To register a handset: 1. Place the unregistered handset in the telephone base or charger. If PRESS FIND HNDST 4 SEC ON BASE does not appear on the handset screen after a few seconds, NOT REGISTERED PRESS FIND HNDST 4 SEC ON BASE  www.vtechphones.com