Vtech Alphabert s Magic Readport User Manual - Page 17

4. Replace the battery cover and tighten the screw to secure the battery cover. Important: While replacing the batteries, the CR2032 backup battery must be kept in AlphaBert's Magic ReadPort™, if not, you will lose all saved information. Backup Battery AlphaBert's Magic ReadPort™ comes with a backup battery already installed. Before using AlphaBert's Magic ReadPort™ remove the protective strip from the backup battery by pulling on the plastic tab. To avoid damage to AlphaBert's Magic ReadPort™ from leaky batteries, replace the backup battery at least once a year. To replace the backup battery: 1. Make sure AlphaBert's Magic ReadPort™ is OFF. 2. Use a screwdriver to loosen the screw of the battery cover. 3. Insert 1 CR2032 size battery as illustrated. 4. Close the battery cover and tighten the screw to secure the battery cover. Important: While replacing the battery, the 3 "AA" batteries must be kept in AlphaBert's Magic ReadPort™. If not, you will lose all saved information. BATTERY NOTICE • Install batteries correctly observing the polarity (+, -) signs to avoid leakage. • Do not mix old and new batteries. • Do not use batteries of different types. • Remove exhausted or new batteries from the learning toy when it will not be used for an extended period of time. • Do not dispose of batteries in fire. • Do not attempt to recharge ordinary batteries. • The supply terminals are not to be short-circuited. • Only batteries of the same and equivalent type as recommended are to be used. WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES. 16 BATTERY NOTICE