Vtech CL80100 User Manual - Page 14

Adding and registering handsets To register a handset to your telephone base (for AT&T CL84100/CL84200/CL84250/CL84300 model) 1. Make sure the handset is out of the charger and alternately shows 1.Press HS LOC on base 4sec 1.Press HS LOC on base 4sec and 2.Then press # on handset before you begin registration. 2. Press and hold LOCATOR on the telephone base for about four seconds until the base 2.Then press screen shows Registering handset..., then on handset release the button. 3. Press # (pound key) on the handset. The screen shows Registering...Please wait. It takes up to 60 seconds to complete registration. Then HANDSET X Registered appears on the screen, with X being the handset number (1-12), and the handset beeps. The handset is now Registering registered with the telephone base. handset...If registration is not successful, the handset screen displays Registration failed. Start again from step one above. NOTES: 1. You cannot register a handset if any other system handset is in use. 2. You cannot register more than 12 handsets to the telephone base. Registration slots are full shows on the base screen while you are doing step two above. # Adding the handset to your telephone base Registering...Please wait HANDSET X Registered HANDSET X Registered 10