Vtech CL82209 User Manual - Page 65
connection with the telephone base. Allow up to one, minute for this to take place.
View all Vtech CL82209 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Appendix D Troubleshooting System does not respond to remote commands. • Make sure you enter your remote access code correctly (page 18). • Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot activate the answering system. • The answering system might not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code. • There may be interference on the phone line you are using. Press dial pad keys firmly. System does not record message. Outgoing announcement is not clear. • Make sure the answering system is on (page 15 or page 39). • Make sure the memory of the answering system is not full. • When you record your announcement, make sure you speak in a normal tone of voice, about nine inches from the telephone base. • Make sure there is no background noise (TV, music, etc.) while recording. Common cure for electronic equipment. If the telephone does not seem to be responding normally, try putting the cordless handset in the telephone base or charger. If it does not seem to respond, do the following (in the order listed): • Disconnect the power to the telephone base. • Disconnect the cordless handset battery, and spare battery, if applicable. • Wait a few minutes. • Connect power to the telephone base. • Re-install the battery, and place the cordless handset into the telephone base. • Wait for the cordless handset to re-establish its connection with the telephone base. Allow up to one minute for this to take place. 60