Vtech CS6429-4 User Manual (CS6429-4 User Manual)

Vtech CS6429-4 Manual

Get Vtech CS6429-4 PDF manuals and user guides
UPC - 735078020017
View all Vtech CS6429-4 manuals
Add to My Manuals
Save this manual to your list of manuals

Vtech CS6429-4 manual content summary:

  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 1
    User's manual w w w.v t e c h p h o n e s .c o m Models: CS6428-2/CS6429/ CS6429-2/CS6429-3/ CS6429-4/CS6429-5
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 2
    , please read Important safety instructions on page 61 of this manual. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech telephone. Please review this manual thoroughly to ensure proper installation and operation of this innovative and
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 3
    a call 16 Predial a call 16 Answer a call 16 End a call 16 Speakerphone 16 Volume 16 Mute 17 Call waiting 17 Temporary ringer silencing 17 Temporary tone dialing 17 Redial list 18 Review and dial a redial entry.........18 Store a number from the redial list to the directory 18 Caller ID
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 4
    base indicators 49 Battery 50 Expand your telephone system.......51 Add and register a handset 51 Replace a handset 52 Troubleshooting 53 Important safety instructions...........61 Precautions for users of implanted cardiac pacemakers 62 Operating range 62 Maintenance 63 About cordless
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 5
    base Charger and charger adapter (1 for CS6428-2 and CS6429-2, 2 for CS6429-3, 3 for CS6429-4 and 4 for CS6429-5) Wall mount bracket User's manual Quick start guide To purchase replacement batteries or power adapters, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 6
    telephone base and charger(s) as shown below. If you subscribe to digital subscriber line (DSL) high-speed Internet service base Charger • Use only the power adapters supplied with this product. To order a replacement, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 7
    light remains on when charging. • If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage. • To purchase replacement batteries, visit our website at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 8
    use. If you place the handset in the telephone base or charger without plugging in a battery, the screen displays NO BATTERY. After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time. For instructions, see Set date and time
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 9
    into the TEL LINE jack on the bottom of the telephone base. Plug the small end of the base power adapter into the POWER jack on the bottom of the telephone base. 2. Position the telephone base against the wall mount bracket. Insert the extend tabs (marked B) of the wall mount bracket into the slots
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 10
    bundled, untie them first. 2. Slide the black wall mount bracket up and remove it from the wall mount plate. Unplug the end of the telephone line cord (or DSL filter) from the telephone wall jack. Unplug the power adapter from the power outlet. 3. Slide the telephone base up and remove it from the
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 11
    to delete all previously reviewed messages (page 43). IN USE light Flashes when there is an incoming call, or another telephone sharing the same line is in use. On when the handset is in use, or the answering system is answering a call. /FIND HANDSET Press to page all system handsets (page 20). /ANS
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 12
    digits or characters. While the handset is ringing, press to silence the ringer temporarily (page 17). While reviewing the redial list, directory or call log, press to delete an individual entry (pages 18, 27 and 34 respectively). /FLASH Press to make or answer a call (page 16). During a call
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 13
    16 or page 42). When entering numbers or names in the directory, press to move the cursor to the left. OFF/CANCEL During a call, press to hang up. While the handset conversation or transfer a call (pages 21-23). REDIAL/PAUSE Press to review the redial list (page 18). While dialing or entering
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 14
    Answering system settings starting on page 35 for instructions on how to modify the answering system settings with a system handset shown in the table below. Setting Answer on/off Announcement (play, record and delete) Call volume (telephone base) Press /VOL or /VOL on the telephone base to adjust
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 15
    • The ringer volume also determines the ringer volume of the intercom calls and the volume of paging tone. • When the handset ringer volume is set to off, that handset is silenced for all incoming calls except paging tone and displays on the handset. • Unless the ringer volume is turned off on that
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 16
    Telephone settings LCD language You can select a language (English, French or Spanish) to be used in all screen displays. 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select >SETTINGS, then press MENU/SELECT. 3. Press or to select >LCD LANGUAGE, then press MENU/SELECT. 4.
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 17
    . Contact your telephone service provider for details. • Voicemail is different from answering system messages recorded in your answering system. For more information about the difference, see page 39. Key tone You can turn the key tone on or off. 1. Press MENU/SELECT when the handset is not in use
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 18
    caller ID service, the day, month and time are set automatically with each incoming call. However, the year must be correct so that the day of the week can be calculated from the caller ID information. Before using the answering system, set the date and time. 1. Press MENU/SELECT when the handset
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 19
    you dial your local calls using only seven digits (area code not required), you can program your home area code so that when you receive a call within your local area, the telephone number is automatically stored without the area code in the call log. 1. Press MENU/SELECT when the handset is not in
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 20
    30 digits). • Press and hold REDIAL/PAUSE to insert a dialing pause (a P appears). • Press MUTE/DELETE or OFF/CANCEL to make corrections. 2. Press /FLASH or to call. Answer a call Press /FLASH, or any dialing key (0-9, TONE or #). End a call Press OFF/CANCEL or put the handset in the telephone base
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 21
    function is turned off. 2. Press MUTE/DELETE again to resume the conversation. The handset screen temporarily shows MICROPHONE ON. MUTED 3:15PMMUTE 12/25 Call waiting When you subscribe to call waiting service from your telephone service provider, you hear an alert tone if there is an incoming
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 22
    operation Redial list Each handset stores the last 10 telephone numbers dialed. When there are already 10 redial entries, the oldest entry is deleted to make room for the new entry. Entries are shown in reverse chronological order. Review 1. Press REDIAL/PAUSE when the handset is not in use. 2.
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 23
    search on page 27). 4. Press MENU/SELECT to dial the displayed number. PHONE 0:01:30 800-595-9511 3:15PM 12/25 >DIRECTORY CALL LOG To access the call log while on a call: 1. Press MENU/SELECT. 2. Press or to scroll to >CALL LOG, then press MENU/SELECT. 3. Press or to scroll to the desired
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 24
    Telephone operation Join a call in progress You can use up to four system handsets at a time on an outside call. You can buy additional expansion handsets (CS6409) for this telephone base. You can register up to five handsets to the telephone base. To join a call: • When a handset is on a call,
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 25
    by pressing OFF/CANCEL or INT on the originating handset. • If the destination handset does not answer the intercom call within 100 seconds, is in the directory or call log, or is out of range, the originating handset shows UNABLE TO CALL. TRY AGAIN and returns to idle mode. • Press OFF/CANCEL
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 26
    transfer and return to the outside call before the intercom call is answered, press OFF/CANCEL, /FLASH or INT on your handset. • If the other handset is not answered within 100 seconds, is in use, on a call or is out of range, the calling handset shows UNABLE TO CALL. TRY AGAIN and then reconnects
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 27
    between the outside call (OUTSIDE CALL displays) and the intercom call (INTERCOM displays). • The destination handset can end the intercom call by pressing OFF/CANCEL, or by placing the handset back in the telephone base or charger. The outside call continues with the original system handset. 23
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 28
    digits for each phone number and 15 characters for each name. • Directory entries are shared by all system handsets. Any modifications made on one handset apply to all system handsets one handset can review the directory at a time. When a handset tries to enter the directory while another handset is
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 29
    handset is not in use. 2. Press or to select >DIRECTORY and then press MENU/SELECT. >DIRECTORY CALL LOG 3. Press or to select >ADD CONTACT, then press MENU/SELECT. The screen displays ENTER NUMBER. 4. Use the dialing keys to enter a number (up to 30 digits name (up to 15 characters). Additional key
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 30
    directory entry (continued) -OR- 1. Enter the number when the handset is not in use. EDIT NUMBER 2. Press MENU/SELECT and the screen displays EDIT NUMBER. 800-595-9511_ 3. Use the dialing keys to edit the number. • Press MUTE/DELETE to erase a digit. • Press and hold MUTE/DELETE to erase all
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 31
    on page 26. Delete a directory entry 1. Search for the desired entry in the directory (see Review the directory or Alphabetical search above). 2. When the desired entry displays, press MUTE/DELETE. Then the handset displays DELETE CONTACT? 3. Press MENU/SELECT to delete the displayed entry. The
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 32
    base and are shared by all handsets. Changes made to the speed dial entries on one handset apply to all. Store a speed dial entry 1. Press MENU/SELECT when the handset occupied, the new directory entry you selected replaces the old one. Take caution not to replace entries you do not wish to delete
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 33
    dialing key (0 through 9) to display the desired speed dial when the handset is not in use. 2. Press /FLASH or to dial the displayed 28 to add a new entry. Delete a speed dial entry 1. Press MENU/SELECT when the handset is not in use. 2. Press or to scroll to select >DIRECTORY, then press MENU/
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 34
    caller ID This product supports caller ID service offered by most telephone service providers. Caller ID allows you to see the name, number, date and time of calls. The available caller ID information will appear after the first or second ring. Information about caller ID with call waiting Caller ID
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 35
    ID service, information about each caller will appear after the first or second ring. If you answer a call before the caller information appear on the screen, it will not be saved in the call log. • The call log stores up to 50 entries. Each entry has up to 24 digits for the phone number and 15
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 36
    Caller ID Missed call indicator When there are calls that have not been reviewed, the idle handset shows XX MISSED CALLS. Each time you review a call log entry marked NEW, the number of missed calls decrease by one. When you have reviewed all the missed calls, the missed calls indicator no longer
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 37
    Caller ID View dialing options Although the call log entries received have 10 digits (the area code plus the seven-digit number), in some areas, you may dial only the seven digits, or 1 plus the seven digits, or 1 plus the area code plus the seven digits. You may change the number of digits
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 38
    Caller ID Delete from the call log To delete one entry: 1. When in the call log, press or to browse. 2. Press MUTE/DELETE to delete the selected entry. The screen displays DELETING... and then you hear a confirmation tone. To delete all entries: 1. Press MENU/SELECT when the handset is not in use.
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 39
    cannot turn the answering system on or off while a handset is on a call or the telephone base is playing messages. Announcement The telephone is preset with a greeting that answers calls with "Hello, please leave a message after the tone." You can use this preset announcement, or replace it with
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 40
    Answering system settings Record a new announcement 1. Press MENU/SELECT when the handset is not in use. 2. Press or to scroll to >ANSWERING SYS, then press MENU/SELECT. 3. Press MENU/SELECT to choose >ANNOUNCEMENT. The system announces, "To play, press 2. To record, press 7." 4. Press 7. The system
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 41
    Answering system settings Call screening You can listen at the telephone base to a caller leaving a message. If you want to turn off the call screening feature, use a system handset to turn this feature off. 1. Press MENU/SELECT when the handset is not in use. 2. Press or to select >ANSWERING SYS,
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 42
    , then press MENU/SELECT to save your selection. You hear a confirmation tone. • The answering system must be turned on for the message alert tone to function. • Press any key on the telephone base (except /FIND HANDSET) to temporarily silence the message alert tone. Recording time You can set the
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 43
    voicemail settings, contact your telephone service provider. Then, if you are on a call, or if the answering system is busy recording a message and you receive another call, the second caller can leave a voicemail message. Set your answering system to answer calls at least two rings earlier than
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 44
    When you are reviewing a new message, displays on the handset. If the message alert tone is turned on, the telephone base beeps every 10 seconds when there are new messages. HANDSET 1 2 NEW MESSAGES 3:15PM 12/25 Call screening at the telephone base If the answering system and call screening are on
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 45
    at the telephone base when a call is answered by the answering system. At the same time, the handset shows TO SCREEN CALL, PRESS [SELECT]. Press MENU/SELECT to screen the call on your handset. The handset shows the caller's information. If you do not subscribe to caller ID service, the handset shows
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 46
    Answering system operation Message playback (continued) To play messages with the telephone base: Press /PLAY/STOP when the there are no messages in the answering system, the handset shows NO MESSAGE and announces, "You have no message." To play messages with a handset: Press MENU/SELECT twice when
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 47
    Answering system operation Delete all old messages To delete all old messages with the telephone base: 1. Press X/DELETE on the telephone base. The system announces, "To delete all old messages, press DELETE again." 2. Press X/DELETE within three seconds. The system announces, "All old messages
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 48
    Answering system operation Record, play or delete memos Memos answering system memory is full, "Memory is full " will be announced. • When the answering system has less than three minutes of recording time left, "Less than three minutes to record," is announced at the telephone base and the handset
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 49
    base ringer level while adjusting. The answering system is being programmed by a system handset. The answering system is answering a call, or recording a memo or announcement. The answering system is being accessed remotely. When the memory is full, the answering system answers incoming calls
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 50
    Answering system operation Remote access A two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19; see Remote access code on page 37 to change it. To remotely access the answering system: 1. Dial your telephone number from any
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 51
    EMPTY There are no call log entries. CALLING HANDSET X (for models with three or more handsets) You are calling another handset. CALLING OTHER HANDSET (for models with two handsets) CALL TRANSFERRED DIRECTORY EMPTY You have transferred an outside call to another cordless handset. There are no
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 52
    from your telephone service provider. You place the handset in the telephone base or charger without installing a battery in that handset. There is no telephone line connected. There are no messages in the answering system. NO SIGNAL, CALL ENDED NOT AVAILABLE AT THIS TIME OUT OF RANGE OR NO PWR
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 53
    is in use. CHARGE On when the handset is charging in the telephone base or charger. Telephone base lights IN USE /ANS ON/OFF On when the telephone line is in use. On when the answering system is answering a call. On when you are registering a handset. Flashes quickly when there is an incoming
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 54
    IN CHARGER shows on the handset screen. CAUTION: To reduce the risk of fire or injury, read and follow these instructions: • Use only the battery(ies) provided or equivalent. To order a replacement, visit our website at www.vtechphones.com or call 1(800) 595-9511. In Canada, go to www.vtechcanada
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 55
    SEC and 2.THEN PRESS # ON HANDSET alternately. Remove the handset from the telephone base and place it back in. Try the registration process again. • You cannot register a handset if any other system handset is in use. • To reset the telephone, unplug the power and the battery for a few seconds then
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 56
    and try again. To reset: 1. Pick up the registered handset and then press /FLASH. 2. Press OFF/CANCEL and place the handset back in the telephone base. -OR• Unplug the power from the telephone base, then plug it back in. You cannot deregister handsets if any other system handset is in use. 52
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 57
    telephone does not work, the problem is probably in the wiring or the local telephone service. Contact your telephone service provider. There is no dial tone. • Try all the above suggestions. • Move the cordless handset closer to the telephone base. It may be out of range. • The telephone line cord
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 58
    in correctly and securely (page 2). • Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one minute for the handset and telephone base to reset. The telephone does not ring when there is an incoming call. • Make sure the handset ringer volume is not set to off
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 59
    be out of range. • Reset the telephone base by unplugging the electrical power to the base. Wait for 15 seconds and plug it back in again. Allow up to one minute for the cordless handset and telephone base to synchronize. • Other electronic products such as HAM radios and other DECT phones can cause
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 60
    the problem is probably in the wiring or local service. Contact your telephone service provider. I hear noise on the cordless handset and the keys do not work. • Make sure the telephone line cord is plugged in securely. REGISTRATION FAILED appears on the handset. • Only one handset can be registered
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 61
    by your telephone service provider. • The caller may not be calling from an area which supports caller ID. • Both your and your caller's telephone service providers must use equipment compatible with caller ID service. • If you subscribe to high-speed Internet service (DSL - digital subscribe line
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 62
    battery from the cordless handset. Wait for 15 seconds, then plug in the power adapter and reinstall the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize. • Other electronic products such as HAM radios and other DECT phones
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 63
    . • Press /VOL on the telephone base or /VOLUME on the handset to increase the speaker volume. The messages on the answering system are incomplete. • If a caller leaves a very long message, part of it may be lost when the answering system disconnects the call after the preset recording time. • If
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 64
    not fix the problem, do the following (in the order listed): 1. Disconnect the power to the telephone base. 2. Disconnect the cordless handset battery. 3. Wait a few minutes before connecting power to the telephone base. 4. Install the battery again and place the cordless handset in the telephone
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 65
    is plugged into the power outlet, or when the handset is replaced in its cradle. This is a common event associated with the closing of any electrical circuit. The user should not plug the phone into a power outlet, and should not put a charged handset into the cradle, if the phone is located in an
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 66
    bystanders with pacemakers from other persons using wireless telephones. Operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and telephone base can communicate over only a certain distance - which can
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 67
    can be damaged if it gets wet. Do not use the handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower. Electrical storms • Electrical storms can sometime cause power surge harmful to electronic equipment. For your own safety, take caution
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 68
    outlet should not be controlled by a wall switch. Calls cannot be made from the cordless handset if the telephone base is unplugged, switched off or if the electrical power is interrupted. • Potential TV interference: Some cordless telephones operate at frequencies that may cause interference to
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 69
    , when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada. What will VTech do if the Product is not free from defects in materials and
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 70
    ) How do you get warranty service? To obtain warranty service, please visit our website www.vtechphones.com, or call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com, or call 1 (800) 267-7377. NOTE: Before calling for service, please review the user's manual - a check of the Product's controls
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 71
    handset may be safely held against the ear of the user. The telephone base shall be installed and used such that parts of the user's body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. This Class B digital Installation Instructions in the user's manual.
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 72
    emergency numbers, please: Remain on the line and briefly explain the reason for the call before hanging up. Perform such activities in off-peak hours, such as early morning or late evening. Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 73
    5 Maximum power allowed by FCC and IC. Actual operating range may vary according to environment conditions at the time of use. Handset: 2.4V Ni-MH battery Telephone base: 6V DC@ 400mA Charger: 6V AC @ 300mA Handset directory: 50 memory locations; up to 30 digits and 15 characters Handset call log
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 74
    Index A About cordless telephones 64 Add a handset 51 Alphabetical search 27 Answer a call 16 Answering system setup 35 Answer on/off 35 B Battery 3, 4, 50 C Caller ID 30 Call log 31 Call screening 37, 40, 41 Call waiting 17 Chain dialing 19 Charger installation 2 Charging 4 Create a new directory
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 75
    Index R Record a new announcement 36 Register a handset 51 Remote access 46 Remote access code 37 Review directory entries 27 Review the call log 32 Ringer 10 Ringer volume (handset) 11 Ringer volume (telephone base) 10 S Safety instructions 61 Speakerphone 16 Store a speed dial entry 28 T Technical
  • Vtech CS6429-4 | User Manual (CS6429-4 User Manual) - Page 76
    TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications, Inc., Beaverton, Oregon 97008. Distributed in Canada by VTech Technologies Canada Ltd., Richmond, B.C. V6W 1L5. Copyright © 2011 for VTECH TELECOMMUNICATIONS LTD. Printed in China. 91
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
User’s manual
www.vtechphones.com
Models:
CS6428-2/CS6429/
CS6429-2/CS6429-3/
CS6429-4/CS6429-5