Vtech DS6151 User Manual (DS6151 User Manual) - Page 71
Screen display messages continued - batteries
UPC - 735078016584
View all Vtech DS6151 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Appendix Screen display messages (continued) L1)NO LINE There is no telephone line connected on line 1. L2)NO LINE There is no telephone line connected on line 2. Line 1 Incoming call There is an incoming call on line 1. Line 2 Incoming call There is an incoming call on line 2. Microphone ON MUTE is turned off and the person on the other end can hear you. Microphone off You have turned off the handset microphone. The other party cannot hear you but you can hear the other party. No signal, call ended Communication between the system handset and telephone base is lost during a call. Not available at this time One system handset or the telephone base is already viewing the call log or directory and another handset/telephone base attempts to review it. Out of range OR no power at base Paging all handsets The system handset cannot communicate with the telephone base. Check the telephone base power connection or move closer. The telephone base is paging handset(s). **Paging** The system handset is paged. Place handset in charger The battery is very low. Place the system handset in the telephone base for recharging. Ringer muted Saved The ringer is muted temporarily during an incoming call. Your selection has been saved. Unable to call try again You try to make an intercom call but the system handset/telephone base you are calling is in the directory, in the call log, on an outside call, or the system handset is out of range. Unable to save You try to save a caller ID entry with no name or number. 67