Vtech Nighty Nite Nature Light User Manual - Page 6
Light Bulb Replacement - bulbs
 |
View all Vtech Nighty Nite Nature Light manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
LIGHT BULB REPLACEMENT 1. Locate the light bulb cover at the bottom of the unit. VOL. 2. Make sure the unit is turned OFF. Use a coin or screwdriver to open the cover. 3. Gently pull out the old light bulb and remove the protection ring from the old light bulb. VOL. 4. Attach the protection ring to the new light bulb. Place the protection ring around the new light bulb and turn the ring until it is securely fastened to the new light bulb. Carefully put the new light bulb into the light bulb socket. Please use a 4.8 volt, 0.3 A light bulb. Please note the maximum power light bulb that can be used is a 2.4 watt light bulb. 5. Replace the light bulb cover and secure the screw using a coin or screwdriver. 5
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
 |
 |
5
LIGHT BULB REPLACEMENT
1.
Locate the light bulb cover at the bottom of
the unit.
2.
Make sure the unit is turned
OFF
. Use a coin
or screwdriver to open the cover.
3.
Gently pull out the old light bulb and remove
the protection ring from the old light bulb.
4.
Attach the protection ring to the new light bulb.
Place the protection ring around the new light
bulb and turn the ring until it is securely
fastened to the new light bulb. Carefully put
the new light bulb into the light bulb socket.
Please use a 4.8 volt, 0.3 A light bulb.
Please
note the maximum power light bulb that can
be used is a 2.4 watt light bulb.
5.
Replace the light bulb cover and secure the
screw using a coin or screwdriver.