Vtech Three Handset Cordless Answering System including a Cordless DECT 6.0 Head - Page 4

Using the menu To enter the handset menu: . Press MENU/SELECT when the handset is not in use. 2. Press / VOL or VOL/CID until the > symbol displays next to the desired feature menu. 3. Press MENU/SELECT to enter that menu. The > symbol indicates the feature to select. >Ringers Settings • To return to the previous menu, press OFF/CLEAR. • To return to idle mode, press and hold OFF/CLEAR. Telephone settings Default settings are indicated by an asterisk(*). Screen display Function Options LCD language Set the screen display language. English* Français Español Clr voicemail Turn off the voicemail indicators. Turn off indicator? Key tone Set whether the handset On* beeps whenever a key is Off pressed. Set date/time Set the date and time for --:-- --/-the telephone system. Home area code Set the home area code so that the call log stores only seven digits for local telephone numbers. _ _ _ Dial mode Set the handset to be tone Tone* dial or pulse dial. Pulse Telephone operation Make a call • Press /FLASH or on the handset and then dial the telephone number. Press on the headset to join the call and hang up the handset at any time. -OR- • Predial by first dialing the telephone number and then press /FLASH or on the handset. Press on the headset to join the call and hang up the handset at any time. Answer a call Press on the headset, or keys on the handset. /FLASH, or any of the dialing End a call • Press on the headset or place the headset in its charger. • Press OFF/CLEAR on the handset or place the handset in the telephone base or its charger. Redial Each system handset stores the 20 most recently dialed numbers. When there are already 20 entries, the oldest entry is deleted to make room for the new entry. To review and dial a number from the redial list: . Press REDIAL/PAUSE when the handset is not in use. 2. Press / VOL, VOL/CID or REDIAL/PAUSE repeatedly until the desired entry displays. 3. Press /FLASH or to dial. To delete a redial entry: When the desired redial entry displays, press MUTE/REMOVE.