Vtech VH621 User Manual - Page 24

Appendix Adding and registering a new headset Option 3: Register a headset to a DECT cordless telephone base 1. Make sure the battery is properly installed in the headset. The LED light on the headset flashes slowly in red and blue to indicate the headset is not registered. 2. Place the headset in the charger cradle and allow it to charge for at least one hour before beginning registration. 3. Remove the headset from the charger cradle. 4. On the telephone base of the cordless phone, press and hold /HANDSET LOCATOR, FIND HANDSET or FIND HS, until the IN USE light turns on and the screen displays the "Registering" message, and then release the button. The LED light flashes quickly in red and blue. • If your telephone base do not have the /HANDSET LOCATOR, FIND HANDSET or FIND HS button: Press and hold the HOLD button until the screen displays Registering... Please wait, then release the button. It takes about 60 seconds to complete the registration process. Once the headset is registered, The LED light turns red when the battery is low and being charged, or turns purple when the battery is well charged, or turns blue when the battery is fully charged. If the registration fails, you hear the voice prompt "Not registered" when you press the ON/OFF button on the headset, and the ON/ OFF button light on the headset alternates slowly in red and blue. Try the registration process again. 20