Weber Genesis 1000 LX NG Owner Manual - Page 16

Step 12, Step 13

Get Weber Genesis 1000 LX NG PDF manuals and user guides View all Weber Genesis 1000 LX NG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Step 12 Check that all burner valves are off You will need: one burner control knob. Valves are shipped in the OFF position, but you should check to be sure. Put the knob on each valve. Check by pushing down and turning clockwise. If they do not turn they are off, proceed to the next step.Figure 13. Step 13 Connect flexible hose to manifold You will need: the 12 foot natural gas supply hose and a 3/4 inch wrench. Thread fitting end of hose onto manifold. Figure 14 (a). Tighten with wrench. (a) Figure 13 Figure 14 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
16
Figure 13
Figure 14
(a)
Step 12
Check that all burner valves are off
You will need: one burner control knob.
Valves are shipped in the OFF position, but you should
check to be sure. Put the knob on each valve. Check by
pushing down and turning clockwise. If they do not turn
they are off, proceed to the next step.Figure 13.
Step 13
Connect flexible hose to manifold
You will need: the 12 foot natural gas supply hose and a
3/4 inch wrench.
Thread fitting end of hose onto manifold. Figure 14 (a).
Tighten with wrench.