Weber Genesis 2 NG Owner Manual - Page 15

Step 11, Step 12

Get Weber Genesis 2 NG PDF manuals and user guides View all Weber Genesis 2 NG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Step 11 Check that all burner valves are off You will need: one burner control knob. (Valves are shipped in the OFF position, but you should check to be sure.) Put the knob on each valve. Check by pushing down and turning clockwise. If they do not turn they are off, proceed to the next step. Figure 12. Step 12 Connect flexible hose to manifold You will need: the 12 foot natural gas supply hose and a 3/4 inch wrench. Thread fitting end of hose onto manifold. Figure 13 (a). Tighten with wrench. (a) Figure 12 Figure 13 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
15
Step 11
Check that all burner valves are off
You will need: one burner control knob.
(Valves are shipped in the OFF position, but you should
check to be sure.) Put the knob on each valve. Check by
pushing down and turning clockwise. If they do not turn
they are off, proceed to the next step. Figure 12.
Figure 12
Step 12
Connect flexible hose to manifold
You will need: the 12 foot natural gas supply hose and a
3/4 inch wrench.
Thread fitting end of hose onto manifold. Figure 13 (a).
Tighten with wrench.
Figure 13
(a)