Weber Genesis 2 NG Owner Manual - Page 26
Unlatch the Spider Stopper Guards and remove.
View all Weber Genesis 2 NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
d) Unlatch the Spider Stopper Guards and remove. Figure 9. g) Lift and twist the burner assembly slightly, to separate the crossover tube from the burners. Figure 12. Remove the burners from the cooking box. Crossover tube Figure 9 e) Remove the manifold bracket and unscrew the two wing nuts that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down. Figure 10. View from behind cooking box Wing nuts Figure 12 h) To reinstall the burners, reverse steps c) through g). ƽCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 13a. Check proper assembly before fastening manifold in place. Figure 13b. (a) Valve Figure 10 f) Slide the burner assembly out from under the guide screw and washer in the corners of the cooking box. Figure 11. Guide screw Burner (b) Figure 11 Figure 13 26