Weber Genesis 2 NG Owner Manual - Page 17

Install Flavorizer Bars and Cooking Grates, Install the bottom tray

Page 17 highlights

Step 14 Install Flavorizer Bars and Cooking Grates You will need: five long Flavorizer Bars, eight short Flavorizer Bars and two cooking grates. Set the long Flavorizer Bars side to side in the lower position, then set the short Flavorizer Bars front to back in the upper position in the cooking box. Figure 16. Step 15 Install the bottom tray You will need: bottom tray, catch pan holder, catch pan and one drip pan. Finger grip on front edge of bottom tray Front side of catch pan holder Figure 18 Hook the ends of the catch pan holder into the hole in the bottom tray. Figure 19. The front of the catch pan holder must be on the same side as the finger grip of the bottom tray. Figure 16 The open "U" of the cooking grates goes down. Set the cooking grates onto the ledges in the cooking box. Figure 17. Finger grip Figure 19 Slide the bottom tray onto the mounting rails under the cooking box with finger grip toward you. Figure 20. ƽCAUTION: Do not line bottom tray with aluminum foil. It can cause grease fires by trapping the grease and not allowing grease to flow into the catch pan. Figure 17 Bottom tray Figure 20 Put the foil drip pan into the catch pan. Slide the catch pan into the catch pan holder with its finger grip towards you. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

17
Step 14
Install Flavorizer Bars and Cooking Grates
You will need: five long Flavorizer Bars, eight short
Flavorizer Bars and two cooking grates.
Set the long Flavorizer Bars side to side in the lower
position, then set the short Flavorizer Bars front to back in
the upper position in the cooking box. Figure 16.
Figure 16
The open "U" of the cooking grates goes down. Set the
cooking grates onto the ledges in the cooking box. Figure 17.
Figure 17
Step 15
Install the bottom tray
You will need: bottom tray, catch pan holder, catch pan and
one drip pan.
Figure 19
Figure 18
Figure 20
Bottom tray
Finger grip on front
edge of bottom tray
Finger grip
Front side of catch
pan holder
Hook the ends of the catch pan holder into the hole in the
bottom tray. Figure 19.
The front of the catch pan holder
must be on the same side as the finger grip of the
bottom tray.
Slide the bottom tray onto the mounting rails under the
cooking box with finger grip toward you. Figure 20.
m
CAUTION: Do not line bottom tray with aluminum foil.
It can cause grease fires by trapping the grease and not
allowing grease to flow into the catch pan.
Put the foil drip pan into the catch pan.
Slide the catch pan into the catch pan holder with its finger
grip towards you.