Weber Genesis Silver B NG Owner Manual - Page 17
Gas Catcher Ignition Chamber and the igniter.
View all Weber Genesis Silver B NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Install manifold brackets The manifold brackets(2) are already in place on the manifold between the valves. Place your hand underneath the manifold. Lift the manifold and cooking box slightly and hook the manifold bracket(2) onto the frame brace(1). (1) (2) Install igniter Note - The igniter wires are already attached to the Gas Catcher Ignition Chamber and the igniter. This was done to factory test the ignition system. The igniter lock nut is on the igniter. 1) Loosen the igniter lock nut. 2) Insert the top of the igniter up through the large part of the keyhole in the frame brace. Slide the igniter into the small part of the keyhole. 3) Tighten the igniter lock nut back onto the igniter. Note - If the igniter works loose, carefully tighten the igniter lock nut with an adjustable wrench or pliers. (1) (2) (3) B-5