Weber Genesis Silver C NG Owner Manual - Page 16

Check that all burner valves are off You will need: burner control knobs. Valves are shipped in the OFF position, but you should check to be sure that they are turned OFF. Put the knob on each valve. Check by pushing down and turning clockwise. If they do not turn, they are off. Proceed to the next step. If they do turn continue turning them clockwise until they stop, then they are off. Proceed to the next step. Install the slide out bottom tray You will need: the slide out bottom tray(1), catch pan holder(2), catch pan and one disposable drip pan. (1) (2) Hook the ends of the catch pan holder into the hole in the slide out bottom tray. The front of the catch pan holder must be on the same side as the finger grip(1) of the bottom tray. Connect flexible hose to manifold You will need: the 12 foot natural supply hose and a 3/ 4 inch wrench. Thread fitting end of hose onto manifold. Tighten with wrench. (1) Slide the bottom tray onto the mounting rails under the cooking box with finger grip toward you(1). ƽ WARNING: Do not line bottom tray with aluminum foil. It can cause grease fires by trapping the grease and not allowing grease to flow into the catch pan. (1) Put the disposable drip pan into the catch pan. Slide the catch pan into the catch pan holder with its finger grip towards you(1). B-6