Weber Summit 675 NG Owner Manual - Page 15
To reinstall the burners, reverse steps 3 through 10. - crossover tube
View all Weber Summit 675 NG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
MAINTENANCE 9. Slide the burner assembly from each Heat Zone. The left and right burners are connected by the Crossover tube. Figure 13 (a). Pull out of here (a) Crossover tube 11. To reinstall the burners, reverse steps 3 through 10. ƽCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 15(a). Check proper assembly before fastening manifold in place. Figure 15 (b). (a) Valve Burner Orifice (b) Figure 13 10. Lift and twist the burner assembly slightly to separate the crossover tube from the burners. Remove the burners from the cooking box. Figure 14. Separate here Figure 15 Crossover tube Figure 14 15
15
11. To reinstall the burners, reverse steps 3 through 10.
m
CAUTION:The burner openings must be positioned
properly over the valve orifices. Figure 15(a).
Check proper assembly before fastening manifold in
place. Figure 15 (b).
Figure 15
(a)
(b)
Valve
Burner
MAINTENANCE
9.
Slide the burner assembly from each Heat Zone. The
left and right burners are connected by the Crossover
tube. Figure 13 (a).
Figure 13
Crossover tube
Pull out of here
10. Lift and twist the burner assembly slightly to separate
the crossover tube from the burners. Remove the
burners from the cooking box. Figure 14.
Figure 14
Separate here
Crossover tube
Orifice
(a)