Weider 138 User Manual - Page 7
indicated.
View all Weider 138 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Be sure that the Uprights (1) are oriented as 3 shown. The high side of the weight rests must be on the side indicated. Attach the Frame (2) to the Crossbar (3) with two M8 x 57mm Bolts (18), two M8 Washers (16) and two M8 Nylon Locknuts (17). 1 0 0 0 1 . 16\ _ 17 : High Side of Weight Rests 18 2 18 16 . 4. Tap a 30mm Square Inner Cap (22) into each end of the Leg Lever (4). Tap a 1" Round Inner Cap (24) into the indicated end of the weight tube. Tap the 1" Angled Round Cap (20) onto the other end of the weight tube. 4 22 , gi 0 o 4 _63 ,....--20 5. Lubricate the M10 x 63.5mm Bolt (32). Attach the Leg Lever (4) to the Frame (2) with the Bolt, M10 Washer (34) and the kii10 Nyion Locknut (33). 24 o v-.k. . 22 5 32-Lubricate 0 0 4 0. , 2 41-33 34 6. Tap two 3/4" Round Inner Caps (9) into each Long Pad Tube (10). Insert the Pad Tubes through the holes in the Leg Lever (4). Slide two Long Foam Pads (23) onto each Pad Tube. 6 23 4 • _ . - . 0 -. . 0. .. .-- • - • ._, - 9 10 9 23 10 s • ' 0 0 7