Weider 8525 English Manual - Page 18
Cable Diagram - cable routing
View all Weider 8525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CABLE DIAGRAM The cable diagram below shows the proper routing of the Long Cable (23) and the Short Cable (58). Use the diagram to make sure that the two Cables and the cable traps have been assembled correctly. If the Cables have not been correctly routed, the weight system will not function properly and damage may occur. The numbers show the correct route for each Cable; the starting and ending points of each Cable are labeled. Make sure that the cable traps do not touch or bind the Cables. Long Cable (23) 4 5 7 2 3 1-High Pulley 6 5-Long "U"-Bracket Short Cable (58) 4 3 2 1-Low Pulley Weight Stack-8 18
18
CABLE DIAGRAM
The cable diagram below shows the proper routing of the Long Cable (23) and the Short Cable (58). Use the
diagram to make sure that the two Cables and the cable traps have been assembled correctly. If the Cables
have not been correctly routed, the weight system will not function properly and damage may occur. The num-
bers show the correct route for each Cable; the starting and ending points of each Cable are labeled.
Make
sure that the cable traps do not touch or bind the Cables.
4
3
2
6
5
7
4
3
2
Weight Stack—
8
1
—Low Pulley
1
—High Pulley
Long Cable (23)
5
—Long “U”-Bracket
Short Cable (58)