Weider Be Pro 265 Bench Enc Manual - Page 11
start all the Screws, and then, tighten them., start all the Screws, and then tighten, them.
View all Weider Be Pro 265 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. Orient the Backrest (6) so that the narrow end (C) is in the indicated location. 10 C Attach the Backrest (6) to the Backrest Tubes (5) with four M6 x 40mm Screws (30) and four M6 Washers (26); start all the Screws, and then tighten them. 6 5 26 30 26 30 11. Attach the Seat (11) to the Frame (2) with four M6 x 40mm Screws (30) and four M6 Washers 11 11 (26); start all the Screws, and then tighten them. 2 26 30 11
11
10. Orient the Backrest (6) so that the narrow end
(C) is in the indicated location.
Attach the Backrest (6) to the Backrest Tubes (5)
with four M6 x 40mm Screws (30) and four M6
Washers (26);
start all the Screws, and then
tighten them.
10
26
26
30
30
5
6
C
11. Attach the Seat (11) to the Frame (2) with four
M6 x 40mm Screws (30) and four M6 Washers
(26);
start all the Screws, and then tighten
them.
11
11
26
30
2