Weider Be Pro 265 Bench Enc Manual - Page 9
Bolts 34 and two M10 Locknuts 33
 |
View all Weider Be Pro 265 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5. Attach the Frame (2) to the Front Leg (8) with three M8 x 15mm Screws (37) and three M8 5 Washers (16); do not tighten the Screws yet. 2 37 16 37 16 8 37 6. Attach the Frame (2) and the Stabilizer (13) to the Crossbar (3) with two M10 x 60mm Carriage 6 Bolts (34) and two M10 Locknuts (33); do not tighten the Locknuts yet. See steps 3-6. Tighten the M10 Locknuts (33) and the M8 x 15mm Screws (37). 2 33 3 34 13 9
-
1 -
2
-
3
-
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15
-
16
-
17
-
18
-
19
-
20
 |
 |
9
37
16
16
37
5.
Attach the Frame (2) to the Front Leg (8) with
three M8 x 15mm Screws (37) and three M8
Washers (16);
do not tighten the Screws yet.
5
2
8
6
6.
Attach the Frame (2) and the Stabilizer (13) to
the Crossbar (3) with two M10 x 60mm Carriage
Bolts (34) and two M10 Locknuts (33);
do not
tighten the Locknuts yet.
See steps 3–6.
Tighten the M10 Locknuts (33)
and the M8 x 15mm Screws (37).
2
3
33
13
34
37