Weider Pro 305 English Manual - Page 7
locations.
View all Weider Pro 305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
7. Insert a 5/16" x 3 1/4" Carriage Bolt (19) through the lower hole in one of the Uprights (1). Tighten a 5/16" Nylon Locknut (26) with a 5/16" Washer (33) onto the Bolt. Do not overtighten the Nylon Locknut. Press a 2" Square Cap (31) into each end of the Right Spotter Rack (4). (See the inset drawings to identify the Right Spotter Rack.) Slide the Right Spotter Rack onto the head of the 5/16" x 3 1/4" Carriage Bolt (19) in the Upright (1). Insert another 5/16" x 3 1/4" Carriage Bolt through the upper holes in the Right Spotter Rack and the Upright from the direction shown. Tighten a 5/16" Knob (25) onto the Bolt. Assemble the Left Spotter Rack (56) to the other Upright (1) in the same manner. 8. Press 2" Square Caps (31) into the Leg Lever (45) in the indicated locations. 7 25 26 33 1 1 56 • 19 31 4 8 t-?..„,.-31 45 -11-31 9. Attach a Weight Tube (30) to the Leg Lever (45) with the 5/16" x 2 1/2" Bolt (39), a 1/2" x 17/32" Spacer (27), two 5/16" Washers (33), and a 5/16" Nylon Locknut (26). Press a 1" Round Cap (29) into the indicated end of the Weight Tube (30). Press a 1" Angled Cap (38) onto the other end. Slide a Weight Stop (36) onto the Weight Tube. 10. Lubricate the 5/16" x 3" Bolt (35). Attach the Leg Lever (45) to the Frame (3) with the 5/16" x 3" Bolt and a 5/16" Nylon Locknut (26). 31 9 45 38 27 33 .. rolld 30 ph 39 . 1v, 4e1 26 33 29 36 10 26 45 3 Lubricate-35 7