Weider Pro 340 Bench English Manual - Page 10
Fully thread the M8 Nut 59 onto the M8 Eyebolt
View all Weider Pro 340 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
11. Lubricate the M10 x 70mm Bolt (41). Attach the Leg 11 Lever (3) to the Front Leg (4) with the Bolt and an 49 M10 Nylon Locknut (49). 3 41 Lubricate 4 12. Insert a Pad Tube (17) through one hole in the Leg Lever (3). Insert another Pad Tube through the other 12 hole in the Leg Lever. Insert the remaining Pad Tube through the upper hole in the bracket on the Front Leg (4). Slide two Foam Pads (18) onto each Pad Tube (17). 18 13. Attach the Curl Pad (24) to the Curl Post (10) with two M6 x 16mm Screws (45). 13 Slide the Curl Post (10) into the Storage Post (27). 14. Fully thread the M8 Nut (59) onto the M8 Eyebolt (39). Insert the M8 Eyebolt through the hole in the 14 Weight Carriage (2) from the direction shown. Tighten an M8 Nylon Locknut (40) onto the Eyebolt. Be sure that there is a 2.1/2" Square Bushing (58) in the top and bottom of the Weight Carriage. (2) 18 17 4 17 3 18 24 45 10 27 39 59 58 2 40 58 10