Weider Pro 350se English Manual - Page 6

Assembly

Get Weider Pro 350se PDF manuals and user guides View all Weider Pro 350se manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Assembly Before beginning assembly, carefully read the following information and instructions: Make Things Easier for Yourself! Everything in this manual is designed to ensure that the assembly of our products can be completed successfully by anyone. However, it is important to recognize that your new equipment is a sophisticated product with many small parts and consequently, the assembly process will take time. Most people find that by setting aside plenty of time, and by deciding to make the task enjoyable, assembly will go smoothly. ¥ Assembly requires two people. ¥ Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. ¥ Tighten all parts as you assemble them, unless instructed to do otherwise. ¥ For help identifying the small parts, use the PART IDENTIFICATION CHART on page 5. ¥ As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. The following tools (not included) are required for assembly: ¥ Two (2) adjustable wrenches ¥ One (1) rubber mallet ¥ One (1) standard screwdriver ¥ One (1) phillips screwdriver ¥ Lubricant, such as grease or petroleum jelly plus soapy water. Assembly will be more convenient if you have the following tools: A socket set, a set of open-end or closed-end wrenches or a set of ratchet wrenches. 1. Before assembling this product, make sure you have read and understand the information in the box above. Orient the Crossbar (3) so the warning decal is facing up as shown. Attach the Crossbar to the Right Upright (1) with two M10 x 70mm Bolts (26), a Support Plate (40), and two M10 Nylon Locknuts (21). Do not tighten the Nylon Locknuts yet. Make sure that the Right Upright is turned as shown. Attach the Crossbar (3) to the Left Upright (16) in the same way. 1 1 26 40 21 Decal 21 21 3 21 2. Attach the Front Leg (8) to the Frame (2) with three M8 x 16mm Bolts (23) and three M8 Washers (20). Do not tighten the Bolts yet. 2 23 2 20 23 20 23 8 16 40 26 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
6
1.
Before assembling this product, make sure you
have read and understand the information in the
box above.
Orient the Crossbar (3) so the warning decal is facing
up as shown. Attach the Crossbar to the Right
Upright (1) with two M10 x 70mm Bolts (26), a
Support Plate (40), and two M10 Nylon Locknuts (21).
Do not tighten the Nylon Locknuts yet. Make sure
that the Right Upright is turned as shown.
Attach the Crossbar (3) to the Left Upright (16) in the
same way.
2.
Attach the Front Leg (8) to the Frame (2) with three
M8 x 16mm Bolts (23) and three M8 Washers (20).
Do not tighten the Bolts yet.
1
2
Before beginning assembly, carefully read the
following information and instructions:
¥
Assembly requires two people.
¥
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
¥
Tighten all parts as you assemble them, unless
instructed to do otherwise.
¥
For help identifying the small parts, use the PART
IDENTIFICATION CHART on page 5.
¥
As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
¥
Two (2) adjustable wrenches
¥
One (1) rubber mallet
¥
One (1) standard screwdriver
¥
One (1) phillips screwdriver
¥
Lubricant, such as grease or petroleum jelly
plus soapy water.
Assembly will be more convenient if you have the
following tools: A socket set, a set of open-end or
closed-end wrenches or a set of ratchet wrenches.
Assembly
Make Things Easier for Yourself!
Everything in this manual is designed to ensure
that the assembly of our products can be complet-
ed successfully by anyone. However, it is impor-
tant to recognize that your new equipment is a
sophisticated product with many small parts and
consequently, the assembly process will take
time. Most people find that by setting aside plenty
of time, and by deciding to make the task enjoy-
able, assembly will go smoothly.
16
26
21
21
21
21
1
3
26
40
40
23
20
2
8
23
23
20
Decal