Weider Pro 9635 English Manual - Page 15
Locate the Military Press Cable 72. - cables
View all Weider Pro 9635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CABLE ASSEMBLY 29. Attach the end of the Low Cable (23) to the 29 Long "U"-Bracket (57) with a 1/4" Nylon Locknut (2) and a 1/4" Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing. 23 30. Attach the High Cable (58) to a Small "U"Bracket (71) with a 1/4" Nylon Locknut (2) and 30 a 1/4" Flat Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing. Attach the Small "U"-Bracket (71) to the indicated Weight Tube (63) with a 5/16" x 1 3/4" Bolt (24) and a 5/16" Nylon Locknut (3). 2 2 10 10 57 58 3 71 63 58 71 10 2 31. Locate the Military Press Cable (72). Attach 31 the Military Press Cable to the other Small "U"-Bracket (71) with a 1/4" Nylon Locknut (2) 3 and a 1/4" Flat Washer (10). Do not com- pletely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in 63 the inset drawing. Attach the Small "U"-Bracket (71) to the indi- 71 72 cated Weight Tube (63) with a 5/16" x 1 3/4" Bolt (24) and a 5/16" Nylon Locknut (3). 10 2 15 57 23 24 10 2 72 71 24 10 2