Weider Pro 9635 English Manual - Page 19
Seat Assembly
View all Weider Pro 9635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
SEAT ASSEMBLY 39. Attach the Front Backrest (41) to the Front 39 Upright (42) with two 1/4" x 2 1/2" Screws (43) and two 1/4" Flat Washers (10). The Backrest must be oriented as shown. 42 41 43 10 40. Press a 1 1/2" Square Inner Cap (32) into the Front Seat Frame (36). Insert a 1/4" x 2" Carriage Bolt (38) through the center hole in the Seat Plate (37). Attach 40 the Seat Plate to the Seat (13) with two 1/4" x 3/4" Screws (18). Insert the 1/4" x 2" Carriage Bolt (38) through the indicated hole in the Front Seat Frame (36). Tighten a 1/4" Nylon Locknut (2) with a 1/4" Flat Washer (10) onto the Carriage Bolt. Attach the other end of the Seat (13) to the Front Seat Frame (36) with a 1/4" Flat Washer (10) and a 1/4" x 2" Machine Screw (81). 41. Press a 1 1/2" Square Inner Cap (32) into the Leg Lever (29). 41 Lubricate the 5/16" x 2 1/4" Bolt (33). Attach the Leg Lever (29) to the Front Seat Frame (36) with the Bolt and a 5/16" Nylon Locknut (3). Insert the 3/8" x 2" Eyebolt (35) into the Leg Lever (29) from the direction shown. Tighten a 3/8" Nylon Locknut (21) with a 3/8" Flat Washer (9) onto the Eyebolt. 42. Rest the Front Seat Frame (36) on the indi- 42 cated pin in the Front Upright (42). Attach the Front Seat Frame to the Front Upright with a 5/16" x 2 3/4" Carriage Bolt (14) and the Seat Knob (40). Thick End 13 38 37 18 32 36 81 10 2 33 35 32 36 3 29 9 21 42 40 14 36 Pin 19