Weslo Pro 11.2x Bike English Manual - Page 7
Set the Backrest Frame 5 on the Seat Frame
View all Weslo Pro 11.2x Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Tip: It may be helpful to loosen the four M6 x 40mm Screws (42) in the Seat Frame (7) before you begin this step. Retighten the Screws after you complete this step. Partially tighten the Adjustment Knob (14) into the Seat Carriage (3). Orient the Seat Carriage (3), the Backrest Frame (5), and the Seat Frame (7) as shown. Set the Backrest Frame (5) on the Seat Frame (7), and then slide the Seat Carriage (3) onto the Backrest Frame. Attach the Seat Carriage (3) and the Backrest Frame (5) to the Seat Frame (7) with two M8 x 40mm Screws (58), an M8 x 120mm Bolt (61), and an M8 Jam Nut (62). 3 3 5 58 62 7 4. Orient the Seat Carriage (3) as shown. Loosen the Adjustment Knob (14) if necessary. 4 Then, slide the Seat Carriage onto the Carriage Rail (9). 14 9 14 42 58 61 3 5. Tighten the Adjustment Knob (14). 5 Attach a Carriage Bumper (24) to the underside of the Carriage Rail (9) with an M4 x 16mm Screw (56). 14 9 24 56 7