Weslo Pursuit 625s Uk Manual - Page 9
How To Operate The Console
View all Weslo Pursuit 625s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
DESCRIPTION OF THE CONSOLE The console features five modes that provide instant exercise feedback during your workouts. The modes are described below. Speed-Displays your pedalling speed, in kilometres per hour*. Time-Displays the length of time you have exercised. Note: If you stop pedalling for ten seconds or longer, the time mode will pause until you resume. Distance-Displays the total number of kilometers* you have pedalled during your workout. Calorie-Displays the approximate number of Calories you have burned. Scan-Displays the speed, time, distance, and calorie modes, for 5 seconds each, in a repeating cycle. *The console can dis- play speed and dis- tance in either kilo- metres or miles. To change the unit of measurement to miles, first remove the console from the Switch exercise cycle (see assembly step 2 on page 6). Locate the small switch on the back of the console and move the switch to the opposite position. To change the unit of measurement back to kilometres, move the switch back to the original position. HOW TO OPERATE THE CONSOLE 1. To turn on the power, press the on/reset button or simply begin pedalling. When the power is turned on, the entire display will appear for two seconds. The console will then be ready for operation. 2. Select one of the five modes: Scan mode- When the power is turned on, the scan mode will automati- Mode Indicators cally be selected. One mode indicator will show that the scan mode is selected, and a flashing mode indica- tor will show which mode is currently displayed. Note: If a different mode is selected, you can select the scan mode again by repeatedly pressing the mode button. Speed, time, distance, or calorie mode-To select one of these modes for continuous display, repeatedly press the mode button. The mode indicators will show which mode is selected. (Make sure that the scan mode is not selected.) 3. To reset the display, press the on/reset button. 4. To turn off the power, simply wait for about four minutes. Note: The console has an "auto-off" feature. If the pedals are not moved and the console buttons are not pressed for four minutes, the power will turn off automatically in order to conserve the batteries. 9