Weslo Pursuit Easy 100 Bike Uk Manual - Page 7

3. While another person holds the Upright (13) near the Frame (1), connect the Extension Wire (23) to the Reed Switch Wire (39). Next, connect the Resistance Cable (19) to the Lower Cable (29) in the following way: • See drawing A. Pull upward on the metal bracket on the Lower Cable (29), and insert the tip of the Resistance Cable (19) into the wire clip inside the metal bracket as shown. • See drawing B. Firmly pull the Resistance Cable (19) upward and slide it into the top of the metal bracket as shown. • See drawing C. Using pliers, squeeze the prongs on the upper end of the metal bracket together. Push the Wires (23, 39) and the Cables (19, 29) downward into the Frame (1). Tip: Do not pinch the wires and cables. Insert the Upright (13) into the Frame (1). Attach the Upright with three M8 x 16mm Patch Screws (34) and three M8 Split Washers (42). 3 13 19 29 34 42 Do not pinch the wires and cables 23 39 34 42 1 A B C Metal Bracket 19 29 19 Metal Bracket 29 7