Weslo Pursuit R 20 Bike Uk Manual - Page 7

6. Have another person hold the Console (5) near the 6 Upright (2). Connect the console wire to the Upper Wire Harness (56). Insert the excess console wire and Upper Wire Harness (56) down into the Upright (2). Attach the Console (5) to the Upright with two M5 x 12mm Screws (52). Be careful to avoid pinching the wires. 2 5 Console Wire 56 52 7. Attach the Handlebar (3) to the bracket on the Upright (2) 7 with the Handlebar Clamp (18), an M5 x 54mm Button Screw (48), an M5 Curved Washer (49), and the Adjustment Handle (17). 48 49 2 8. Identify the Left Pedal (10), which is marked with a 8 sticker. Using an adjustable spanner, firmly tighten the Left Pedal counterclockwise into the left arm of the Crank (12). Tighten the Right Pedal (not shown) clock- wise into the right arm of the Crank. Important: Tighten both Pedals as firmly as possible. After using the exercise cycle for one week, retighten the Pedals. For best performance, the Pedals must be kept tightened. 12 10 Be careful to avoid pinching the wires. 3 18 17 9. Make sure that all parts are properly tightened before you use the exercise cycle. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor. 7